Справочное Руководство для 3com S7906E

 

1-15 

System view 

2: System level 

dir-name: The name of the directory where a log file is saved, a string of 1 to 64 characters. 

Use the info-center logfile switch-directory command to configure the directory where a log file is 

saved. Ensure that the directory is created first before saving a log file into it. 

By default, the directory to save a log file is the logfile directory under the root directory of the storage 

device. For a device supporting CF partition, the directory to save a log file is the logfile directory in the 

second partition of the storage device.  

Note that this command can be used to configure the directory to which a log file can be saved. The 

configuration will lose after system restart or active/standby switchover of the main control boards. 

# Create a directory with the name test under flash root directory. 

<Sysname> mkdir test 

%Created dir flash:/test. 

 # Set the directory to save the log file to flash:/test. 

<Sysname> system-view 

[Sysname] info-center logfile switch-directory flash:/test 

info-center loghost host-ip [ channel { channel-number | channel-name } | facility local-number ] *

 

undo info-center loghost host-ip 

System view 

2: System level 

host-ip: The IP address of the log host. 

channel: Specifies the channel through which system information can be output to the log host. 

channel-number: Specifies a channel number, in the range 0 to 9. 

channel-name: Specifies a channel name, which could be a default name or a self-defined name. The 

user needs to specify a channel name first before using it as a self-defined channel name. For more 

information, refer to the info-center channel name command.