Справочное Руководство для 3com S7906E

 

1-9 

2: System level 

interval: Interval between two consecutive tests, in milliseconds, in the range 0 to 604800000. If the 

interval is 0, it indicates that only one test is performed. 

Use the frequency command to configure the interval between two consecutive tests for a test group. 

Use the undo frequency command to restore the default. 

By default, the interval between two consecutive tests for a test group is 0 milliseconds, that is, only one 

test is performed. 

After you use the nqa schedule command to start an NQA test, one test is started at interval. 

 

If the last test is not completed when the interval specified by the frequency command is reached, a 

new test is not started. 

 

# Configure the interval between two consecutive tests as 1000 milliseconds. 

<Sysname> system-view 

[Sysname] nqa entry admin test 

[Sysname-nqa-admin-test] type icmp-echo 

[Sysname-nqa-admin-test-icmp-echo] frequency 1000 

history-records number 

undo history-records 

Any NQA test type view 

2: System level 

number: Maximum number of history records that can be saved in a test group, in the range 0 to 50.