Справочное Руководство для 3com S7906E

 

2-25 

Use the port trunk pvid vlan command to set the default VLAN ID of the ONU port configured as a 

trunk port.  

Use the undo port trunk pvid command to restore the default.  

By default, the default VLAN on a Trunk port is VLAN 1. 

For a Trunk port, after you execute the undo vlan command to remove the default VLAN of the Trunk 

port, the default VLAN of the Trunk port does not change. That is to say, the Trunk port can use the 

non-existing VLAN as the default VLAN. 

Related commands: port link-type. 

# Configure the default VLAN ID for the Trunk port ONU 3/0/1:1 as 100. 

<Sysname> system-view 

[Sysname] interface onu 3/0/1:1 

[Sysname-Onu3/0/1:1] port link-type trunk 

[Sysname-Onu3/0/1:1] port trunk pvid vlan 100 

ONU port view 

2: System level 

None 

Use the reboot onu command to restart the ONU.  

Before using this command, make sure the ONU is online. 

# Restart ONU 3/0/1:1.  

<Sysname> system-view 

[Sysname] interface onu 3/0/1:1 

[Sysname-Onu3/0/1:1] reboot onu 

reset counters uni [ uni-number ]