Справочное Руководство для 3com S7906E

 

2-29 

2: System level 

uni-number: UNI number, in the range 1 to the number of UNI ports of the current ONU. The number of 

UNIs can be up to 80.  

full: Specifies the port to be in full duplex mode.  

half: Specifies the port to be in half duplex mode.  

auto: Specifies the duplex mode of the port to be auto-negotiation.  

Use the uni duplex command to set the duplex mode for UNIs.  

Use the undo uni duplex command to restore the duplex mode on the current port to the default value.  

By default, the duplex mode on UNIs is full.  

 

This command takes effect on H3C ONUs only.  

 

# Configure UNI 1 to operate in the auto-negotiation mode. 

<Sysname> system-view 

[Sysname] interface onu 3/0/1:1 

[Sysname-Onu3/0/1:1] uni 1 duplex auto 

uni uni-number flow-control 

undo uni uni-number flow-control 

ONU port view 

2: System level 

uni-number: UNI number, in the range 1 to the number of UNI ports of the current ONU. The number of 

UNIs can be up to 80.