Справочное Руководство для 3com S7906E

 

3-13 

None

 

Use the alarm oam error-frame enable command to enable the error frame alarm. 

Use the undo alarm oam error-frame enable command to disable the error frame alarm. 

By default, this function is enabled. 

 

The commands here take effect only for OAM 2.0 and above.  

 

# Enable the error frame alarm for the ONU corresponding to ONU 3/0/1:1. 

<Sysname> system-view 

[Sysname] interface onu 3/0/1:1 

[Sysname-Onu3/0/1:1] alarm oam error-frame enable 

alarm oam error-frame-seconds-summary { window window | threshold threshold } * 

undo alarm oam error-frame-seconds-summary { window | threshold } * 

OLT port view, ONU port view, FTTH view 

2: System level 

window  window: Specifies the window size, in the range 100 to 9000 (in 100 ms). By default, the 

window size is 600. 

threshold threshold: Specifies the alarm threshold, in the range 1 to 900 (in seconds). By default, the 

threshold is 1 second. 

Use the alarm oam error-frame-seconds-summary command to configure the corresponding 

window size and alarm threshold. 

Use the undo  alarm oam error-frame-seconds-summary to restore the default window size and 

alarm threshold.