Справочное Руководство для 3com S7906E

 

1-7 

Version 

RIP version running on the interface 

MetricIn 

Additional routing metric added to the incoming routes 

MetricIn route policy 

Name of the routing policy used to add the additional 
routing metric for the incoming routes. If no routing policy is 
referenced, the field displays Not designated.  

MetricOut 

Additional routing metric added to the outgoing routes 

MetricOut route policy 

Name of the routing policy used to add the additional 
routing metric for the outgoing routes. If no routing policy is 
referenced, the field displays Not designated. 

Split-horizon 

Indicates whether split-horizon is enabled (ON: enabled, 
OFF: disabled) 

Poison-reverse 

Indicates whether poison-reverse is enabled (ON: enabled, 
OFF: disabled) 

Input/Output 

Indicates if the interface is allowed to receive (Input) or 
send (Output) RIP messages (on means it is allowed, off 
means it is not allowed) 

Default route 

Default route 

Current packets number/Maximum 
packets number 

Packets to be sent/Maximum packets that can be sent on 
the interface 

 

display rip process-id route [ statistics | ip-address { mask | mask-length } | peer ip-address ] 

Any view 

1: Monitor level 

process-id: RIP process ID, in the range of 1 to 65535. 

statistics: Displays the route statistics, including total number of routes and number of routes of each 

neighbor. 

ip-address { mask | mask-length }: Displays route information about a specified IP address. 

peer ip-address: Displays all routing information learned from a specified neighbor. 

Use the display rip route command to display the routing information of a specified RIP process. 

# Display all routing information of RIP process 1. 

<Sysname> display rip 1 route