Руководство Пользователя для Insignia ns-l46q120-10a
51
NS-L42Q120-10A/NS-L46Q120-10A 42"/46" LCD TV
www.insigniaproducts.com
Specifications
Specifications subject to change without notice.
No picture
•
Make sure the video input cable is
securely connected to the correct
terminal, and that the correct input
mode is enabled. For example, when a
VGA cable is connected to display a
computer screen, the PC input mode
must be enabled.
securely connected to the correct
terminal, and that the correct input
mode is enabled. For example, when a
VGA cable is connected to display a
computer screen, the PC input mode
must be enabled.
•
In TV mode, verify that the antenna is
correctly connected and that the
preferred channel is enabled in the
channel list.
correctly connected and that the
preferred channel is enabled in the
channel list.
•
Press MENU, then select Picture to
adjust the display settings.
adjust the display settings.
•
If you are using a Macintosh computer
that is older than a G3 model, you need
a Macintosh adapter.
that is older than a G3 model, you need
a Macintosh adapter.
No picture or the “Unsupported
signal” or “No signal” message
appears when a VGA cable is
connected
signal” or “No signal” message
appears when a VGA cable is
connected
•
Make sure the VGA cable is correctly
connected to the TV’s VGA port.
connected to the TV’s VGA port.
•
Decrease the video resolution setting
on the computer and try again.
on the computer and try again.
•
Press MENU, select Settings, then
select Computer Settings to adjust
the computer settings.
select Computer Settings to adjust
the computer settings.
Picture is cut off or appears in a
sidebar screen
sidebar screen
•
Press ZOOM and make sure that the
Normal option is selected.
Normal option is selected.
Poor image quality in TV mode (cutoff
picture, snowy images)
picture, snowy images)
•
Check your antenna connection. If
necessary, rotate the antenna and wait
up to ten seconds for a signal.
necessary, rotate the antenna and wait
up to ten seconds for a signal.
•
Reduce signal splitters and excessively
long cables.
long cables.
•
Replace poor antenna cables or
connectors to improve signal quality.
connectors to improve signal quality.
•
Press ZOOM and make sure the
Normal option is selected.
Normal option is selected.
•
Press MENU, select Picture, then
select Advanced Video and adjust the
Noise Reduction setting.
select Advanced Video and adjust the
Noise Reduction setting.
•
In HDMI mode, make sure that the
external device is compatible with
your TV.
external device is compatible with
your TV.
Wrong, abnormal, or missing colors
•
If any colors (red, green or blue) are
missing, check the video cable to make
sure it is securely connected. Loose or
broken pins in the cable connector
could cause a poor connection.
missing, check the video cable to make
sure it is securely connected. Loose or
broken pins in the cable connector
could cause a poor connection.
•
Press MENU, select Picture, then
select Settings to adjust the Color and
Tint settings. You can also select
Picture, then select Advanced Video
to adjust the Color Temperature
settings.
select Settings to adjust the Color and
Tint settings. You can also select
Picture, then select Advanced Video
to adjust the Color Temperature
settings.
•
Connect the TV to another computer to
see if the problem is with the
computer.
see if the problem is with the
computer.
Audio
No sound
•
Make sure the audio input cable is
correctly connected to the correct
terminal and that the correct input
mode is enabled.
correctly connected to the correct
terminal and that the correct input
mode is enabled.
•
The volume may be muted. Press MUTE
or Vol+ button to turn on the volume.
or Vol+ button to turn on the volume.
•
Press MENU, then select Audio to
adjust the Bass, Treble, and Balance
settings.
adjust the Bass, Treble, and Balance
settings.
•
If you are using an external audio
device, make sure volume on the
external audio device is turned on.
device, make sure volume on the
external audio device is turned on.
Password
Password has been compromised
•
Change the password. See “Changing
the password” on page 28.
the password” on page 28.
Problem
Solution
Models
NS-L42Q120-10A/NS-L46Q120-10A
LCD panel
Panel
42- or 46-inch active matrix full
High-Definition TFT
High-Definition TFT
Motion control
120 Hz MEMC (motion control, motion
enhancement) chip
enhancement) chip
Resolution
1920 x 1080 (RGB vertical stripe)
Color
42-inch: 8 bit / 16.77 million
46-inch: 10 bit /1.07 billion
46-inch: 10 bit /1.07 billion
Viewing angle
178° horizontal; 178° vertical
Contrast ratio
4000:1
Brightness
400 nits
Response time
6.5 ms
Physical
specifications
specifications
NS-L42Q120-10A
Dimensions (W × D × H)
With stand:
41.1 × 12.22 × 29.32 in.
(1043.94 × 310.47× 744.77 mm)
Without stand:
41.1 × 4.26 × 26.72 in.
(1043.94 × 108.3 × 678.6 mm)
Weight
With stand: 46.3lb (21.0kg)
Without stand: 39.6lb (17.97kg)
With stand:
41.1 × 12.22 × 29.32 in.
(1043.94 × 310.47× 744.77 mm)
Without stand:
41.1 × 4.26 × 26.72 in.
(1043.94 × 108.3 × 678.6 mm)
Weight
With stand: 46.3lb (21.0kg)
Without stand: 39.6lb (17.97kg)
NS-L46Q120-10A
Dimensions (W × D × H)
With stand:
44.29 × 12.22 × 30.87in.
(1125 × 310.47× 784 mm)
Without stand:
44.29 × 4.13 × 28.48 in.
(1125 × 105 × 723.41 mm)
Weight
With stand: 54.3lb (24.6kg)
Without stand: 47.6lb (21.6kg)
With stand:
44.29 × 12.22 × 30.87in.
(1125 × 310.47× 784 mm)
Without stand:
44.29 × 4.13 × 28.48 in.
(1125 × 105 × 723.41 mm)
Weight
With stand: 54.3lb (24.6kg)
Without stand: 47.6lb (21.6kg)
TV
Standard
NTSC and ATSC
Tuning system
Electronic tuning system
Frequency range
VHF and UHF
CATV
135 channel, QAM channels
Compatibility
480i, 480p, 720p, 1080i, 1080p
Power
Input voltage
120 VAC, 60 Hz, 3A
Consumption
42": 207w 115V
46": 244w 115V
Off: <1 W
46": 244w 115V
Off: <1 W
Speaker output
10 W (two channels)
Terminals
AV 1 and 2 inputs
Video, audio L/R
S-Video1 and 2 inputs
S-Video, audio L/R
Component 1 and 2
inputs
inputs
Y, PB, Pr, audio L/R
HDMI 1, 2, 3, and 4
HDMI IN
VGA
VGA input, audio (mini jack)
Audio
Audio output, L/R (analog) SPDIF
output (digital)
output (digital)
Antenna
F type
Image processor
Broadcom Xilleon™ X243