Дополнительное Руководство для Cavalry cadb001u32
7. Replace the back panel and screw the screws back on.
8. Plug in the power cord and use the USB cable to connect the unit to the computer.
9. Turn on the computer.
10. Right-click on My Computer and select “Manage”.
11. Go to “Disk Management” and a window should pop up called “Initialize and Convert Disk
8. Plug in the power cord and use the USB cable to connect the unit to the computer.
9. Turn on the computer.
10. Right-click on My Computer and select “Manage”.
11. Go to “Disk Management” and a window should pop up called “Initialize and Convert Disk
Wizard”.
12. Keep clicking next until you finish and that window closes.
13. In the bottom pane, you should see the computer’s original hard drive at the top.
14. Now locate your external hard drive, which should now be recognized as two drives. The
13. In the bottom pane, you should see the computer’s original hard drive at the top.
14. Now locate your external hard drive, which should now be recognized as two drives. The
first of the drives should have twice the capacity as the second. (Figure 3)
Figure 3.
15. Right-click on the first drive and select “Delete Partition”.
16. Right-click again on the first drive and select “New Partition”.
17. Click-next to set your preferred settings. Formatting will begin.
18. Now follow the same steps (16-17) for the second drive.
19. Go to My Computer once formatting has completed. Two new drives should appear
16. Right-click again on the first drive and select “New Partition”.
17. Click-next to set your preferred settings. Formatting will begin.
18. Now follow the same steps (16-17) for the second drive.
19. Go to My Computer once formatting has completed. Two new drives should appear
available to use.
20. You can now use the individual hard drives separately.
JBOD to SPAN
1. To return the unit to its original default settings, follow the steps above in removing the
back panel.
2. Move the black jumper cap back to the SPAN settings (Figure 1)
3. Replace the back panel and screw the screws back on.
4. Plug in the power cord and use the USB cable to connect the unit to the computer
5. Turn on the computer.
6. Right-click on My Computer and select “Manage”
7. Go to “Disk Management”
8. Locate the hard drives, which should now be located on the same row. (Figure 4)
3. Replace the back panel and screw the screws back on.
4. Plug in the power cord and use the USB cable to connect the unit to the computer
5. Turn on the computer.
6. Right-click on My Computer and select “Manage”
7. Go to “Disk Management”
8. Locate the hard drives, which should now be located on the same row. (Figure 4)