Руководство Пользователя для Xerox 2101
5.7 Z-Folding
107
Making Copies
Added
Fe
atures
atures
Basic
Features
Image
Quality
Stored Job
Templates
Output
Format
3
Select On for Z Fold.
When selecting Z Fold with stapling/punching:
The copies are stapled as shown below depending on the position(s) specified
for stapling or punching holes.
for stapling or punching holes.
(1)Select Collated/Stapled/Punched and specify the position
to be stapled or punched.
(2)Check Original Orientation.
4
Select Save to specify settings for other features if necessary.
5
Press Start.
Copies will be made and output to the finisher tray.
●
● When Z Fold is selected with
stapling/punching, the number of
copies will be different from
standard stapling/punching
performance due to the location of
the stapling and punching.
copies will be different from
standard stapling/punching
performance due to the location of
the stapling and punching.
● When the positions for punching and
stapling are in conflict (e.g. stapling
on the top left and punching on the
right), the machine will not start even
if you press the Start button. Check
the positions again.
on the top left and punching on the
right), the machine will not start even
if you press the Start button. Check
the positions again.
Stapling
left side
left side
Stapling
right side
right side
When Top Left is selected
When Top Right is selected