Руководство Пользователя для Xerox 3320dni
Setup Options
Xerox Phaser 3320DN/3320DNI
User Guide
User Guide
82
Auto Continue
Determines whether or not the machine
continues printing when it detects the
paper does not match the paper settings.
• Off: If a paper mismatch occurs, the
machine waits until you insert the correct
paper.
• On: If a paper mismatch occurs, an error
message will display. The machine waits
for about 30 seconds, then automatically
clear the message and continues printing.
continues printing when it detects the
paper does not match the paper settings.
• Off: If a paper mismatch occurs, the
machine waits until you insert the correct
paper.
• On: If a paper mismatch occurs, an error
message will display. The machine waits
for about 30 seconds, then automatically
clear the message and continues printing.
•
On*
•
Off
Paper Subst.
Automatically substitutes the printer
driver’s paper size to prevent the paper
mismatch between Letter and A4. For
example, if you have A4 paper in the tray
and you select Letter in the printer driver,
the machine prints on A4 paper and vice
versa.
driver’s paper size to prevent the paper
mismatch between Letter and A4. For
example, if you have A4 paper in the tray
and you select Letter in the printer driver,
the machine prints on A4 paper and vice
versa.
•
On
•
Off*
Paper Mismatch
Determines whether to disregard the
paper mismatch error or not. If Off is
selected, the machine continues to print
even if the paper mismatches.
paper mismatch error or not. If Off is
selected, the machine continues to print
even if the paper mismatches.
•
On*
•
Off
Tray Chaining (Auto
Tray Switch)
Tray Switch)
Determines whether or not the machine
continues printing when a tray runs out of
paper. When On is selected, the paper
supply will be switched to an alternative
tray if possible and printing will continue.
Option not available if Paper Source is set
to Auto.
continues printing when a tray runs out of
paper. When On is selected, the paper
supply will be switched to an alternative
tray if possible and printing will continue.
Option not available if Paper Source is set
to Auto.
•
On*
•
Off
Default Paper
Use this option to set the default size of
paper.
paper.
•
Letter*
•
A4
Metric Default
Use to set the machine to display
measurements in millimeters or inches.
measurements in millimeters or inches.
•
Inches*
•
Millimeters
Altitude Adj.
The xerographic process used in your
machine to make prints is affected by air
pressure. Air pressure is determined by the
height of the machine above sea level.
The machine will automatically
compensate for differences in air pressure
if you enable the feature.
machine to make prints is affected by air
pressure. Air pressure is determined by the
height of the machine above sea level.
The machine will automatically
compensate for differences in air pressure
if you enable the feature.
•
Normal*
•
High1
•
High2
•
High3
Line Term.
Allows you to append the required
carriage return to each line feed, which is
useful for Unix or DOS users.
carriage return to each line feed, which is
useful for Unix or DOS users.
•
LF*
•
LF+CR
Option
Description
Settings
* denotes factory default