Инструкции По Установке для Xerox 128
Installation Preparation Document
(for physical installation of the product only)
Xerox DocuTech 128/155/180 HighLight Color
701P46159
October 2006
October 2006
The main DocuTech 128/155/180 HLC components are:
•
Sun Blade
TM
2500 Controller
•
CD/DVD combo drive
•
color flat panel monitor
•
keyboard and mouse
•
Ethernet interface (10/100/1000 BaseT)
•
Three printer interface cards
•
Controller Stand
•
Options
•
•
18/36 track tape drive
•
Online connection
•
QIC tape
•
USB floppy disk drive
or
•
•
Sun W1100Z (AMD) contoller
•
•
CD/DVD combo drive
•
color flat panel monitor
•
keyboard and mouse
•
Ethernet interface (10/100/1000 BaseT)
•
Three printer interface cards
•
Controller Stand
•
Options
•
•
18/36 track tape drive
•
Online connection
•
QIC tape
•
USB floppy disk drive
•
Solaris 10 and DocuSP print services software
•
Printer
•
•
Black plus one highlight color*
•
Xerographic engine with laser raster imaging system for
black and Light Emitting Diode for color
black and Light Emitting Diode for color
•
Permanent housing for black dry ink; customer changeable
unit (CCU) for color dry ink
unit (CCU) for color dry ink
•
Prints simplex or duplex
•
Inverter Feeder/Stacker and up to 3 additional
feeder/stackers
feeder/stackers
•
Optional Bypass Transport to provide connection to
additional finishers
additional finishers
* Additional dry inks, not listed on this document, will be customer
options as they become available, and will be offered under standard
Xerox terms and conditions.
options as they become available, and will be offered under standard
Xerox terms and conditions.
Space Requirements / Service Space Envelope
The dimensions shown below are absolute minimums.
Configuration
Width
Depth
Min total
req’d
Width x
depth
Weight
With inverter
feeder/stacker
and one
feeder/stacker
feeder/stacker
and one
feeder/stacker
173.3
(in)
433.3
(cm)
48.8 (in)
122
(cm)
262.5 x
131.5 (in)
631.3 x
328.8
(cm)
3164 lbs
1438 kg
With inverter
feeder/stacker
and two feeder
stackers
feeder/stacker
and two feeder
stackers
205.6
(in)
511.3
(cm)
48.8 (in)
122
(cm)
294.8 x
131.5 (in)
737 x
328.8
328.8
(cm)
3685 lbs
1675 kg
With inverter
feeder/stacker
and three
feeder/stackers
feeder/stacker
and three
feeder/stackers
237.9
(in)
594.4
(cm)
48.8 (in)
122
(cm)
327.1x
131.5 (in)
817.8 x
328.8
(cm)
4206 lbs
1912 kg
Optional Bypass
Transport*
Transport*
20.4 (in)
51 (cm)
51 (cm)
28.3 (in)
71 (cm)
176
lbs
80 kg
•
The minimum total space required includes the required space
necessary for the Xerox service personnel to service the printer.
necessary for the Xerox service personnel to service the printer.
•
A minimum of 78 inches/198 cm clearance from the floor to the
nearest overhead obstruction must be maintained.
nearest overhead obstruction must be maintained.
•
The printing system must be installed in a fixed location.
•
Space requirements for the controller stand are 36 x 36
inches/91 x 91 cm.
inches/91 x 91 cm.
•
For proper operation, the printer must be perfectly level. On
floors less than two degrees out of level, a leveling kit must be
used to level the equipment. The printer will not function
properly on floors more than two degrees out of level.
floors less than two degrees out of level, a leveling kit must be
used to level the equipment. The printer will not function
properly on floors more than two degrees out of level.
•
For detailed space requirements and diagrams, refer to the
DocuTech 128/155/180 HighLight Color Installation Planning
Guide.
DocuTech 128/155/180 HighLight Color Installation Planning
Guide.
Electrical Requirements (printer)
The printer requires:
•
•
60 HZ service (2 cords required)
MultiSource
2-phase, dual power cord
configuration
Voltage 208/240
(4 wire)
208/240
(4 wire)
Amperage (dedicated)
50
30
Cycles
60 Hz
60 Hz
Receptacle Xerox Part No.
Receptacle NEMA Part No.
14-50R
14-30R
Receptacle Diagram
Power Cord Kit Number
Power Cord Length
15 feet
15 feet