Руководство Пользователя для Xerox 550
Setting Up
2
User Manual
2-13
In a few moments, when the CopyStation and printer complete
their power-up sequences, the CopyStation’s front-panel displays
a message such as
their power-up sequences, the CopyStation’s front-panel displays
a message such as
Printer is idle
. (On occasion, it may
display a message indicating that the printer has accepted a
print job from a computer and is busy or waiting.)
print job from a computer and is busy or waiting.)
3.
Raise the CopyStation’s document cover. Place a color letter-size
image (ideally, a test print made by the printer) face down on the
CopyStation’s glass, in the upper-right corner.
image (ideally, a test print made by the printer) face down on the
CopyStation’s glass, in the upper-right corner.
4.
Close the document cover.
5.
Press the green Copy button on the right side of the CopyStation’s
front panel. The CopyStation transfers the image to the printer.
This process normally takes a couple of minutes and is
accompanied by the status message
front panel. The CopyStation transfers the image to the printer.
This process normally takes a couple of minutes and is
accompanied by the status message
Copy in progress.
The resulting copy should look very similar to the original. Chapter 3,
“Making Copies,” describes how to make temporary adjustments to a
copies’ lightness and color balance. Chapter 4, “Using Special Functions,”
describes how to change default settings for copying settings.
“Making Copies,” describes how to make temporary adjustments to a
copies’ lightness and color balance. Chapter 4, “Using Special Functions,”
describes how to change default settings for copying settings.
9020-13
Phaser CopyStation
5