Руководство Пользователя для Xerox 550
User Manual
6-1
Chapter
6
Moving and Shipping
Moving the CopyStation
To prepare the CopyStation for moving or shipping, disconnect it from
power, disconnect its SCSI cable, put its copier mechanism in the parked
position, and pack it in its box. Details of disconnecting the SCSI cable vary
depending on whether you also have a disk drive connected.
power, disconnect its SCSI cable, put its copier mechanism in the parked
position, and pack it in its box. Details of disconnecting the SCSI cable vary
depending on whether you also have a disk drive connected.
Disconnecting the CopyStation (without a disk drive)
1.
Switch the CopyStation’s power and the printer’s power off.
2.
Remove the SCSI cable connecting the CopyStation to the printer.
a.
At the printer end of the SCSI cable, squeeze the sides of the
cable’s plug to release its catches from the printer’s connector,
then pull the plug away from the connector.
cable’s plug to release its catches from the printer’s connector,
then pull the plug away from the connector.
b.
On the CopyStation end of the SCSI cable, pull the wire clips
away from the cable’s plug to unfasten it from the connector,
then pull the plug away from the connector.
away from the cable’s plug to unfasten it from the connector,
then pull the plug away from the connector.
3.
If you are not moving the printer:
Switch the printer’s power back on so it will be available to
computer users again.
computer users again.
4.
If the printer has no disk drive connected to it, skip ahead to the
topic “Putting the copier mechanism in the parked position.”
topic “Putting the copier mechanism in the parked position.”