Инструкции По Установке для Xerox 740

After the PhaserPort software is installed, the Add PhaserPort dialog is 
displayed.  Create your first port:

In the Description field, enter a name for the port (this can be the 
printer name/model, location, or any other descriptive name of 
your choice), such as Phaser 740. 

In the Name/Address field, enter the IP address or DNS name of 
the printer (for example, 192.1.1.2).     

Click OK.

If you have NetWare software installed on your computer, you are 
asked if you want to install the PhaserShare Administrator software.  If 
you also want to print using NetWare, choose Yes, then click Next. 

If you chose to install drivers and PPD files earlier in the installation, 
the Finish Installation dialog displays information about the Add 
Printer Wizard.  Read the information, then click Next to start the Add 
Printer Wizard, which allows you to install the driver for your printer. 
The drivers are on your printer’s CD-ROM.

Install the printer.

In the Add Printer Wizard, click Next.  Choose Local printer, then 
click Next. 

Click Have Disk, type the drive letter for the CD-ROM, and click 
OK

.

Select your printer from the list, then click Next.

In the Available ports list, select the port you created during the 
first part of the installation and click Next. 

If you don’t know the printer’s IP address or DNS name, click Browse 
to display a list of printers on the network.  Double-click the printer 
you want; PhaserPort automatically enters the information into the 
Add PhaserPort

 dialog.  To search the network again, click Refresh; to 

narrow down the search by using subnets, click Advanced.

If you did not choose to install drivers and PPD files earlier in the 
installation, go to Step 5.