Справочник Пользователя для Xerox x2 tech

    The following describes the attribute available for 

each media: 

The Wait Carriage attribute determines the 
time delay in seconds that the printer waits 
between passes to allow the ink to be 
absorbed by the media. 

0 – 30 seconds in 0.1 second 
intervals. 

The Wait Cut attribute determines the amount of 
time, in seconds, the printer waits after the last 
pass before performing the cut operation. This 
allows time to let the print image stabilize to 
avoid possible smearing before cutting the print 
from roll. 

0 – 30 seconds in .1 second 
intervals 

Magnification  The vertical movement of media between 

passes of the carriage head is governed by the 
number of cycles of the media transport 
system's forward motor. This fine-tunes the 
amount of media vertical movement that is 
associated with each pass of the print heads.  
This value is set at the factory and may vary 
slightly from media to media. 

-0.50% --  and +0.50% in 0.01 
intervals. 

 

Sets automatic media cutting. 

NORMAL CUT / NO CUT