Руководство По Установке для Gestetner c7528
Installing Options
103
Check the USB host interface unit is connected firmly to the controller board.
❒ Be sure to return the provided screwdriver to its original position on the in-
side of the front cover.
❒ After finishing installation, check the USB host interface unit is installed
properly: print the configuration page from the “List/Test Print” menu. If it is
installed properly, you will see “USB Host” for “Device Connection”.
installed properly, you will see “USB Host” for “Device Connection”.
❒ If the USB host interface unit is not installed properly, reinstall it from the
start of the procedure. If you cannot install it properly even after attempting
reinstallation, contact your sales or service representative.
reinstallation, contact your sales or service representative.
❒ You can connect the USB cable from a digital camera to the USB host in-
terface unit. For details, see
or Soft-
ware Guide.
For details about printing the configuration page, see
.