Руководство По Установке для Gestetner c7528
Installing Options
80
B
Turn off the power then unplug the power cable, and then interface ca-
ble.
ble.
C
Slowly open the front cover of the printer, and remove the green screw-
driver, and then close the cover.
driver, and then close the cover.
D
Remove the four screws fastening the controller board to the back of the
printer, using the provided screwdriver.
printer, using the provided screwdriver.
The removed screws will be used later to fasten the controller board.
E
Holding the handle, slowly pull out the controller board.
Put the controller board down on a flat surface.