Руководство По Работе для Gestetner ao70

Copying

Fine Magnification

Paper can expand or shrink be affect-
ed, which can result in copies where
size of the original and the copy do
not match (such as under humid con-
dition). This function uses the meas-
urements of the original and the copy
to calculate a ratio to produce copies
that are close to actual size.

Note

❒ Fine Magnification is used for orig-

in a ls t h a t ha ve a lre ad y b e en
scanned. If you want to perform
fine magnification corrections to
paper that has stretched due to the
type of paper or exposure to hu-
mid conditions, see "Fine Magnifi-
cation: Copier" in the System
Settings manual.

❒ Set the correction ratio after meas-

uring the length and width of the
original and the copy.

❒ When Fine Magnification is select-

ed, depending on the pattern of
original, moire patterns may be
noticeable or the image quality
may deteriorate.

Press the [Reduce/Enlarge] key.

Press the [Fine Mag.] key.

Select the paper type you want to
correct, then adjust the horizontal
and vertical ratio using the [-] and
[+]

keys.

Note

❒ If you make a mistake, press the

[Cancel]

key, and then repeat the

procedure again.

ZEDG010E

Calculating the Correction Value (%)

To copy at the same size as the original

Example)

Copy

Original

Horiz.

... For the example above:

correction value(%)

Set the correction value (horizontal) to 0.8%.

DolphinGB-Copy-F_V4_FM.book Page 62 Monday, June 11, 2001 5:02 PM