Руководство По Работе для Gestetner cp6244
Originals
11
1
Originals
The maximum original size that you can place on the exposure glass is 304.8
×
432mm, 12"
× 17".
If your originals have bold letters or solid images at the leading edges, you might
get prints with dirty edges. In this case, place the original face down on the ex-
posure glass, with its widest margin toward the paper delivery tray.
Place originals on the exposure glass only after the ink or correction fluid on
them is completely dry. Not taking this precaution could stain the exposure
glass and cause the stains to be printed.
As a general rule, place originals on the exposure glass as shown below.
get prints with dirty edges. In this case, place the original face down on the ex-
posure glass, with its widest margin toward the paper delivery tray.
Place originals on the exposure glass only after the ink or correction fluid on
them is completely dry. Not taking this precaution could stain the exposure
glass and cause the stains to be printed.
As a general rule, place originals on the exposure glass as shown below.
The first 5mm, 0.2", of the leading edge cannot be printed. When using the op-
tional document feeder, the first 5mm, 0.2", of the leading edge as well as the last
2mm, 0.08", of the trailing edge cannot be printed.
tional document feeder, the first 5mm, 0.2", of the leading edge as well as the last
2mm, 0.08", of the trailing edge cannot be printed.
a = 5mm, 0.2"
Original
Print
ZDZX030E