Руководство Пользователя для Gestetner dsc224
NetWare Configuration
70
5
OOOO
Assign the printer to the created print server as follows.
A Click [Assignments], and then click [Add] in the [Assignments] group.
B In the [Available objects] box, click the printer created in step
A Click [Assignments], and then click [Add] in the [Assignments] group.
B In the [Available objects] box, click the printer created in step
, and then
click [OK].
C After checking the settings, click [OK].
Note
❒ If the printer works as configured, the name of the print server appears
as an attached user.
Using Pure IP in the NetWare 5/5.1 Environment
AAAA
Log on to the file server as an Administrator or an administrator equivalent.
BBBB
Run the NIB Setup Tool.
Reference
See p.60 “Running the NIB Setup Tool” .
See p.60 “Running the NIB Setup Tool” .
CCCC
Click [Property Sheet] and click [OK].
The [Network board list] dialog box appears.
The [Network board list] dialog box appears.
DDDD
Click [TCP/IP protocol].
EEEE
Click the IP address of the Network Interface Board which is to be config-
ured, and then click [Next >].
ured, and then click [Next >].
Note
❒ If you do not know which Network Interface Board you are configuring,
see the network configuration page to check the MAC address (Network
Address).
Address).
FFFF
Make sure that the MAC address and IP address are correct, and then click
[Finish]
[Finish]
.
The [NIB Setup Tool] window appears.
GGGG
Click [Configure].
The property sheet appears.
The property sheet appears.
HHHH
Click the [General] tab, and then type the name of the print server into the
[Device Name]
[Device Name]
box.