Руководство По Работе для Gestetner dsc332
Remote Maintenance by telnet
103
9
The following is a sample configu-
r at i o n u s i n g t h e r e g i s t r a tio n
number 3 with the IP address
192.168.15.16:
msh> snmp 3 ip 192.168.15.16
r at i o n u s i n g t h e r e g i s t r a tio n
number 3 with the IP address
192.168.15.16:
msh> snmp 3 ip 192.168.15.16
The following is a sample configu-
r at i o n u s i n g t h e r e g i s t r a tio n
number 3 with the IPX address
7390A448, and the MAC address
00:00:74:62:5C:65:
msh> snmp 3 ipx 7390A448:0000
r at i o n u s i n g t h e r e g i s t r a tio n
number 3 with the IPX address
7390A448, and the MAC address
00:00:74:62:5C:65:
msh> snmp 3 ipx 7390A448:0000
IPP
Use the "ipp" command to configure
IPP settings.
IPP settings.
❖
❖
❖
❖ Viewing setting
The following command displays
the current IPP setting:
the current IPP setting:
msh> ipp
Example output:
Example output:
timeout=900(sec) auth off
• The “timeout” setting specifies
how many seconds the compu-
ter keeps trying to access the
network printer to send print
jobs if no connection can be
made.
ter keeps trying to access the
network printer to send print
jobs if no connection can be
made.
• The “auth” setting indicates the
user authorization mode.
❖
❖
❖
❖ IPP timeout configuration
Specify how many seconds to wait
before canceling a print job if it has
been interrupted for some reason.
The time can be from 30 to 65535
seconds.
before canceling a print job if it has
been interrupted for some reason.
The time can be from 30 to 65535
seconds.
msh> ipp timeout {30 - 65535}
❖
❖
❖
❖ IPP user authorization configuration
Use IPP user authorization to re-
strict printing with IPP to certain
users. The default is “off”.
strict printing with IPP to certain
users. The default is “off”.
msh> ipp auth
{basic|digest|off}
{basic|digest|off}
• “basic” and “digest” are user
authorization settings.
• “off” removes the user authori-
zation.
Note
❒ If you select “basic” or “digest”,
see next section “Configuring
IPP user authorization” for how
to configure the user name. Up
to ten user names are available.
IPP user authorization” for how
to configure the user name. Up
to ten user names are available.
❖
❖
❖
❖ Configuring IPP user authorization
Use the following command:
msh> ipp user
The following message appears:
The following message appears:
Input user number (1 to 10):
Enter the number, user name, and
password.
Enter the number, user name, and
password.
IPP user name:user1 IPP
password:*******
After configuring, the following
message appears:
password:*******
After configuring, the following
message appears:
IPP configuration changed.