Руководство По Работе для Gestetner dsc332
137
6. Remarks
Dos and Don'ts
R CAUTION:
Important
❒ Do not turn the power off while
the On indicator is lit or blinking.
Doing so may damage the hard
disk.
Doing so may damage the hard
disk.
❒ Before unplugging the power cord
or turning off the main power
switc h, m ake sure remaining
m e m ory space is at 100% , a s
shown on the display. See p.22
“Turning Off the Power” and p.23
“Turning Off the Main Power”.
switc h, m ake sure remaining
m e m ory space is at 100% , a s
shown on the display. See p.22
“Turning Off the Power” and p.23
“Turning Off the Main Power”.
• When you use this machine for a
long time in a confined space with-
out good ventilation, you may de-
tect an odd smell. To keep the
workplace comfortable, we recom-
mend that you keep it well venti-
lated.
out good ventilation, you may de-
tect an odd smell. To keep the
workplace comfortable, we recom-
mend that you keep it well venti-
lated.
• Do not touch areas on or around
the fusing unit. These areas may
become hot.
become hot.
• After making copies continuously,
the exposure glass may become
warm—this is not a malfunction.
warm—this is not a malfunction.
• The area around the ventilation
hole might feel warm. This is
caused by exhaust air and is not a
malfunction.
caused by exhaust air and is not a
malfunction.
• When the machine is not in use
and in stand-by mode, you may
hear a small noise inside. This is
caused by the image stabilization
process and is not a malfunction.
hear a small noise inside. This is
caused by the image stabilization
process and is not a malfunction.
• Do not turn off the operation
switch while copying or printing.
Make sure that all copying and
printing has finished first.
Make sure that all copying and
printing has finished first.
• The machine might not produce
good copy images if condensation
forms inside as a result of rapid
temperature change.
forms inside as a result of rapid
temperature change.
• Do not open the covers of the ma-
chine during copying or printing.
If you do, misfeeds might occur.
If you do, misfeeds might occur.
• Do not move the machine during
copying or printing.
• The machine might not produce
good copy images if condensation
forms inside as a result of rapid
temperature change. To avoid pos-
sible condensation, this machine is
equipped with anti-condensation
heaters. Even when the main pow-
er switch is off, the machine con-
t i n u e s t o m a i n t a i n a s t a b l e
temperature when the anti-con-
densation heaters are on.
forms inside as a result of rapid
temperature change. To avoid pos-
sible condensation, this machine is
equipped with anti-condensation
heaters. Even when the main pow-
er switch is off, the machine con-
t i n u e s t o m a i n t a i n a s t a b l e
temperature when the anti-con-
densation heaters are on.
• If you operate the machine im-
properly or a machine failure oc-
curs, settings might be lost. Be sure
to make a note of your machine
settings.
curs, settings might be lost. Be sure
to make a note of your machine
settings.
• The supplier shall not be liable for
any loss or damage resulting from
mechanical failure, loss of settings,
or use of the machine.
mechanical failure, loss of settings,
or use of the machine.
• Unplug the power cord from the
wall outlet before you move the
machine. While moving the ma-
chine, you should take care that
the power cord will not be dam-
aged under the machine.
machine. While moving the ma-
chine, you should take care that
the power cord will not be dam-
aged under the machine.
0816JupiterC1GSG_GB_FM.book Page 137 Friday, August 29, 2003 7:56 PM