Сетевое Руководство для Gestetner dsm651
Setting Up the Machine on a Network
37
2
❖
❖
❖
❖ Ping Command
Check the network connection
with ping command using given
IP address.
with ping command using given
IP address.
Note
❒ If you fail to connect to the net-
work, check the following, and
then retry the ping command.
• Check TCP/IP of the printer
then retry the ping command.
• Check TCP/IP of the printer
is active.
• Check that the machine with
assigned IP address is con-
nected to the network.
nected to the network.
• There is a possibility that same
IP address is used for the spec-
ified equipment .
ified equipment .
❖
❖
❖
❖ Permit SNMP V3 Communication
Set the encrypted communication
of SNMP v3.
• Encryption Only
• Encryption / Clear Text
of SNMP v3.
• Encryption Only
• Encryption / Clear Text
Note
❒ If you set to [Encryption Only],
you need to set password for
the machine.
the machine.
❖
❖
❖
❖ Permit SSL / TLS Communication
Set the encrypted communication
of SSL/TLS.
• Ciphertext Only
• Ciphertext Priority
• Ciphertext / Clear Text
of SSL/TLS.
• Ciphertext Only
• Ciphertext Priority
• Ciphertext / Clear Text
Note
❒ Default: Ciphertext Priority
❒ If you set to [Encryption Only], you
❒ If you set to [Encryption Only], you
need to install the server authen-
tification for the machine.
tification for the machine.
❖
❖
❖
❖ Host Name
Specify the host name.
❖
❖
❖
❖ Machine Name
Specify the machine name.
IEEE 1394
Preparation
You must install the optional IEEE
1394 interface board in the ma-
chine.
1394 interface board in the ma-
chine.
❖
❖
❖
❖ IP Address
When you connect the machine to
a network using the IEEE 1394 in-
terface, you must configure the IP
address and subnet mask.
• Auto-Obtain (DHCP)
• Specify
a network using the IEEE 1394 in-
terface, you must configure the IP
address and subnet mask.
• Auto-Obtain (DHCP)
• Specify
When you select [Specify], enter
the [IP Address] and [Sub-net
Mask]
the [IP Address] and [Sub-net
Mask]
as “xxx.xxx.xxx.xxx”(“x”
indicates a number).
• IP Address: 011.022.033.044
• Sub-net Mask: 000.000.000.000
• IP Address: 011.022.033.044
• Sub-net Mask: 000.000.000.000
Note
❒ Default: Auto-Obtain (DHCP)
❒ If you use the interface for Eth-
❒ If you use the interface for Eth-
ernet and IEEE 1394 (IP over
1394) at the same time, settings
must be made carefully. See
p.137 “Using DHCP”
1394) at the same time, settings
must be made carefully. See
p.137 “Using DHCP”
❒ When you use the IEEE 1394 in-
terface on a network, you can-
not use the Ethernet interface in
the same domain. To use both
interfaces in the same domain,
set different values for the [Sub-
net Mask]
not use the Ethernet interface in
the same domain. To use both
interfaces in the same domain,
set different values for the [Sub-
net Mask]
.
❒ The physical address (EUI-64)
also appears.
❖
❖
❖
❖ DDNS Configuration
You can specify the DDNS set-
tings.
• Active
• Inactive
tings.
• Active
• Inactive
❖
❖
❖
❖ Host Name
Specify the host name.