Руководство По Работе для Gestetner f104
Reception Features
82
4
Two in One
When two messages of the same size
and orientation are received consecu-
tively, they are printed on a single sheet
when you turn this feature on. This can
help you economize on paper.
• Two A5
and orientation are received consecu-
tively, they are printed on a single sheet
when you turn this feature on. This can
help you economize on paper.
• Two A5
K messages are printed
side by side on a sheet of A4
L.
• Two 5
1
/
2
”
×8
1
/
2
”
K messages are
printed side by side on a sheet of
8
8
1
/
2
”
×11" L
Note
❒ This feature does not work with
messages larger than A4
K, or
8
1
/
2
"
×11"K. When 8
1
/
2
"
×11" K
size paper is loaded in the machine,
each page of the received message
is output onto a single sheet.
each page of the received message
is output onto a single sheet.
❒ This feature is not available with
Polling Reception or when copying.
❒ If the sent pages are of different
width, or were sent with different
scan settings, this feature is not
available.
scan settings, this feature is not
available.
❒ If paper matching the size and ori-
entation of a received document is
not available, Two In One is not
possible.
not available, Two In One is not
possible.
❒ You can turn this feature on or off
with the User Parameters. See
p.146 “User Parameters” (switch
10, bit 1).
p.146 “User Parameters” (switch
10, bit 1).
❒ This feature uses Memory Reception.
Page Separation and Length
Reduction
Reduction
When the size of a received message
is longer than the paper loaded in the
machine, each page of the message
can be split and printed on several
sheets, or reduced and printed on a
single sheet. For example, when
8
is longer than the paper loaded in the
machine, each page of the message
can be split and printed on several
sheets, or reduced and printed on a
single sheet. For example, when
8
1
/
2
"
×11"L or A4 paper is loaded,
this feature splits the received mes-
sage if the excess length is about 20
mm (0.8 in.) or more, and reduces it if
the excess length is within about 20
mm (0.8 in.). When a message is split,
the split mark (
sage if the excess length is about 20
mm (0.8 in.) or more, and reduces it if
the excess length is within about 20
mm (0.8 in.). When a message is split,
the split mark (
p) is inserted at the
split position and about 10 mm (0.4
in.) of the split area is duplicated on
the top of the second sheet.
in.) of the split area is duplicated on
the top of the second sheet.
Note
❒ Your service representative can
customize this feature with the fol-
lowing settings. Bracketed values
are defaults.
• Reduction (on)
• Print split mark (on)
• Overprinting (on)
• Overprinting length (10 mm or
lowing settings. Bracketed values
are defaults.
• Reduction (on)
• Print split mark (on)
• Overprinting (on)
• Overprinting length (10 mm or
0.4 in.)
• Guideline for split (when mes-
sage is 20 mm or 0.8 in. longer
than paper)
than paper)
GFSYUI0N
B C
A B
∗
2
2
GFBUNK0N
(Document)
A B C
StellaF2_EN_Combine_F_FM.book Page 82 Friday, February 14, 2003 5:16 PM