Справочник Пользователя для CRU RAX210-NJ 40650-0630-0000
Модели
40650-0630-0000
CRU-WiebeTech
R A X 4 1 0 - N J U s e r M a n u a l ( A 9 - 4 1 0 - 0 0 0 2 ) R E V 1 . 0
- 7 -
6. Technical Specifications
Product name / part number:
RAX410-NJ (0GB US Part Number: 35450-0630-0000)
Host Interfaces:
One SFF-8470 (“Infiniband”)
Drive Types Supported:
3.5-inch SATA (Serial-ATA) hard drives
TrayFree™ Technology:
Yes, for front two drives. Rear drives are not TrayFree.
Power LED:
Yes, one per drive
Access LED:
Yes, one per drive
Operating System Requirements:
Windows XP, Vista, Windows 7
Mac OS X
Mac OS X
Operating Temperature:
50 – 85° Fahrenheit (10 – 30° Celsius)
Operating Humidity:
5% to 95%, noncondensing
Power Switch:
2 position: On / Off
Power Supply:
Input: 100-240VAC
Output: 125 Watts
Output: 125 Watts
Cooling Fan:
Dual 4cm exhaust fans
External Material:
Electro-galvanized cold rolled steel
RAX410-NJ Weight:
15lbs
Shipping Weights:
17lbs without drives
23lbs with drives
23lbs with drives
Dimensions:
(429mm W x 413mm D x 44mm H)
Warranty:
2-year limited warranty. See warranty statement for details and
limitations. WiebeTech offers free phone support for 90 days after
purchase (1-866-744-8722). After 90 days, email support is available at
limitations. WiebeTech offers free phone support for 90 days after
purchase (1-866-744-8722). After 90 days, email support is available at
support@wiebetech.com
.
RAX and TrayFree are trademarks of CRU-DataPort.
InfiniBand is a trademark of the InfiniBand Trade Association.
Other marks are the property of their respective owners.
© 2009, 2010 CRU-DataPort. All rights reserved.
FCC Compliance Statement: “This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired
operation.”
In the event that you experience Radio Frequency Interference, you should take the following steps to resolve the problem:
1)
Ensure that the bottom plate and case of your attached drive is grounded, either to the UltraDock case or to an Earth ground.
2)
Use a data cable with RFI reducing ferrites on each end.
3)
Use a power supply with an RFI reducing ferrite approximately 5 inches from the DC plug.
If you have any questions or problems, please contact
support@wiebetech.com
for technical support. If you are
interested in purchasing more WiebeTech products, check our website or contact
sales@wiebetech.com
. We
appreciate being able to serve you!
Tested to comply
with FCC standards
FOR HOME OR OFFICE USE