Справочник Пользователя для ONKYO HT-S8400

En

You can assign a default listening mode to each input 
source that will be selected automatically when you select 
each input source. For example, you can set the default 
listening mode to be used with Dolby Digital input 
signals. You can select other listening modes during 
playback, but the mode specified here will be resumed 
once the AV receiver has been set to standby.

■

Analog/PCM/Digital
With this setting, you can specify the listening mode 
used when an analog (CD, TV, LD, VHS, MD, 
turntable, radio, cassette, cable, satellite, etc.) or PCM 
digital (CD, DVD, etc.) audio signal is played.

■

Mono/Multiplex Source
With this setting, you can specify the listening mode 
used when a mono digital audio signal is played (DVD, 
etc.).

■

2ch Source
With this setting, you can specify the listening mode 
used when 2-channel (2/0) stereo digital sources, such 
as Dolby Digital or DTS, are played.

■

Dolby D/Dolby D Plus/TrueHD
With this setting, you can specify the listening mode 
used when Dolby Digital or Dolby Digital Plus format 
digital audio signals are played (DVD, etc.). Specifies 
the default listening mode for Dolby TrueHD sources, 
such as Blu-ray or HD DVD (input via HDMI).

■

DTS/DTS-ES/DTS-HD
With this setting, you can specify the listening mode 
used when DTS or DTS-HD High Resolution format 
digital audio signals are played (DVD, LD, CD, etc.). 
Specifies the default listening mode for DTS-HD 
Master Audio sources, such as Blu-ray or HD DVD 
(input via HDMI).

■

Other Multich Source
Specifies the default listening mode for multichannel 
PCM sources from HDMI IN such as DVD-Audio, and 
DSD multichannel sources such as Super Audio CD.

■

`

Off, 30 to 79

With this setting, you can limit the maximum volume.
To disable this setting, select “Off”.

■

`

Last, Min, 1 to 79 or Max

With this preference, you can specify the volume setting 
to be used each time the AV receiver is turned on.
To use the same volume level that was used when the AV 
receiver was turned off, select “Last”.
The “Power On Volume” cannot be set higher than the 
“Maximum Volume” setting.

■

`

–12dB to 0dB to +12dB

With this preference, you can specify the headphone 
volume relative to the main volume. This is useful if 
there’s a volume difference between your speakers and 
your headphones.

■

`

On 

`

This preference determines whether operation details are 
displayed on-screen when an AV receiver function is 
adjusted.
Even when “On” is selected, operation details may not be 
output if the input source is connected to an HDMI IN.

■

`

English, Deutsch, Français, Español, Italiano, 
Nederlands, Svenska

This setting determines the language used for the on-
screen setup menus.

q/w to select the input source that you want to 

The following menu appears.

q/w to select the signal format that you want to 

e/r to select a listening mode.

Only listening modes that can be used with each input 
signal format can be selected (

pages 32 to 35).

The “Last Valid” option means that the listening 
mode selected last will be used.

• If you connect an input component (such as UP-A1 series 

Dock that seated iPod) to the UNIVERSAL PORT jack, 
the only listening modes you can assign to the “PORT” 
selector are specific to analog sound.

• For  the  TUNER input selector, only “Analog” will be 

available.

• For  the  NET or USB input selector, only “Digital” will be 

available.