Справочник Пользователя для ONKYO HT-S8400

En

■

■

To control Zone 2, you must press ZONE2 on the remote 
controller first.

■

■

If your Zone 2 speakers are connected to a receiver or 
integrated amp in Zone 2, use its volume control to adjust 
the volume.

■

• To unmute, press ZONE2 followed by MUTING again.

• Only analog input sources are output from the ZONE 2 LINE 

OUT L/R jacks and ZONE 2 L/R terminals. Digital input 
sources are not output. If no sound is heard when an input source 
is selected, verify that the source is connected to an analog input.

• While Zone 2 is on, 

u functions will not work.

• You cannot select different AM or FM radio stations for your 

main room and Zone 2. The same AM/FM radio station will be 
heard in each room. Namely, if you have selected an FM station 
for the main room, that station will also be output in Zone 2.

• When you have selected NET or USB as the input selector, the 

last selector selected will be set for both Main room and Zone 2.

• Zone 2 can also be unmuted by adjusting the volume.
• When Zone 2 is activated and its input selector is selected, the 

power consumption of standby mode slightly increases.

• When setting the AV receiver to standby mode while Zone 2 is 

active, the Z2 indicator is dimly lit.

Zone 2 turns on, the Z2 indicator lights on the 
display.

To select AM or FM, press the TUNER input selector 
button repeatedly. 

To select the same source as the main room’s, press 
ZONE 2 repeatedly until “Z2 Selector: Source” 
appears on the display.

The zone is turned off.

8RECEIVER.

Zone 2 turns on, the Z2 indicator lights on the 
display.

followed by an input selector button.
To select AM or FM, press the TUNER input selector 
repeatedly. 

• You cannot select different AM or FM radio stations for 

your main room and Zone 2. The same AM/FM radio 
station will be heard in each room.

8RECEIVER.

Input selector buttons

8RECEIVER

q/w

Input selector buttons

q/w to adjust the volume.