Инструкция С Настройками для ONKYO ht-s680
46
Advanced Setup
Speaker Distance
To get the best from surround sound, it’s important that
the sound from each speaker reaches the listener at the
same time. To achieve this, you need to specify the dis-
tance from each speaker to the listening position.
the sound from each speaker reaches the listener at the
same time. To achieve this, you need to specify the dis-
tance from each speaker to the listening position.
Notes:
• The Center and Subwoofer distances can be set up to
• The Center and Subwoofer distances can be set up to
5 ft. (1.5 m) more or less than the Front distance. For
example, if the Front distance is set to 20 ft. (6 m), the
Center and Subwoofer distances can be set between 15
and 25 ft. (4.5 and 7.5 m).
example, if the Front distance is set to 20 ft. (6 m), the
Center and Subwoofer distances can be set between 15
and 25 ft. (4.5 and 7.5 m).
• The Surround and Surround Back distances can be set
up to 5 ft. (1.5 m) more or 15 ft. (4.5 m) less than the
Front distance. For example, if the Front distance is set
to 20 ft. (6 m), the Surr Right, Surr Left, Surr Back
distances can be set between 5 and 25 ft. (1.5 and
7.5 m).
Front distance. For example, if the Front distance is set
to 20 ft. (6 m), the Surr Right, Surr Left, Surr Back
distances can be set between 5 and 25 ft. (1.5 and
7.5 m).
Advanced Speaker Settings
1
Measure and make a note of the
distance from each speaker to
the listening position.
distance from each speaker to
the listening position.
2
Press the [RECEIVER] button fol-
lowed by the [SETUP] button on
the remote controller.
lowed by the [SETUP] button on
the remote controller.
MUTING
MENU
TOP MENU
SP A / B
SETUP
RETURN
RANDOM
SUBTITLE
PLAY MODE
AUDIO
REPEAT
RC-
606S
--/---
TAPE/AMP
ON
STANDBY
DIMMER
SLEEP
INPUT SELECTOR
REMOTE MODE
V
1
V
2
V
3
C D
TAPE
TUNER
DVD
MULTI CH
LISTENING MODE
DISPLAY
TEST TONE
CH SEL
SURROUND
STEREO
CINE FLTR
LEVEL+
LEVEL-
L NIGHT
OR-EQ
VOL
CDR
MD
DVD
RECEIVER
C D
+10
0
CLR
1
2
3
4
5
6
7
8
9
ENTER
CH
DISC
SETUP
RECEIVER
ENTER
The advanced speaker settings cannot be
changed while headphones are connected,
Speaker set B is on, or the multichannel input
is being used.
changed while headphones are connected,
Speaker set B is on, or the multichannel input
is being used.
3
Use the Up and Down [
]/[
]
buttons to select “2. Sp Dis-
tance,” and then press the
[ENTER] button.
tance,” and then press the
[ENTER] button.
4
While “Unit” is displayed, use the
Left and Right [
Left and Right [
]/[
] buttons to
select “feet” or “meters”.
feet: Distances in feet. Can be set
from 1 to 30 feet in 1-foot
steps.
steps.
meters: Distances in meters. Can be
set from 0.3 to 9 meters in
0.3-meter steps.
0.3-meter steps.
5
Use the Down [
] button to
select “Front,” and use the Left
and Right [
and Right [
]/[
] buttons to
specify the distance for the “front
speakers,” then press the Down
[
speakers,” then press the Down
[
] button to select the next
speaker.
6
Repeat step 5 for all speakers.
7
Press the [SETUP] button.
Setup closes.
Setup closes.