Инструкция С Настройками для ONKYO ht-s680

50

Advanced Setup—Continued

The following table shows the display indicators for each 
supported digital signal format.

Normally, the AV receiver detects the signal format auto-
matically. However, if you experience either of the fol-
lowing issues when playing PCM or DTS material, you 
can manually set the signal format to PCM or DTS:
• If the beginnings of tracks from a PCM source are cut 

off, try setting the format to PCM.

• If noise is produced when fast forwarding or reversing 

a DTS CD, try setting the format to DTS.

While “Auto” is displayed (about 3 sec-
onds), press the [DIGITAL INPUT] button 
again to select: PCM, DTS, or Auto.
DTS or PCM: The DTS or PCM indicator, 
depending on which format you have set, flashes, 
and only signals in that format are output. Digital 
signals in other formats are ignored.
Auto (default): The format is detected automati-
cally. If no digital input signal is present, the cor-
responding analog input is used instead.