Инструкции По Установке для ONKYO DR-C500

14

1 FRONT SPEAKERS A/B, SURROUND SPEAKERS and

FRONT SPEAKERS A system: To enjoy home theater sound.
Speaker terminals are provided for the front left, front right, center,
surround left and surround right speakers.
FRONT SPEAKERS B system: To enjoy stereo sound. Speaker
terminals are provided for the front left and front right.

2 AUDIO (TV/LINE IN / TAPE/CD-R IN/OUT /

These are the analog audio inputs and outputs. There are 4 audio
inputs and 2 audio outputs. The audio inputs and outputs require
RCA type connectors.
When connecting a VCR or other video component, make sure you
connect the audio and video leads to the same set of jacks (i.e.,
both to VIDEO 1).

3 ANTENNA terminals [20, 21]

These terminals are for connecting the FM antenna and AM
antenna.

4 VIDEO (VIDEO 1 IN/OUT / VIDEO 2 IN) jacks [18]

There are 2 video inputs and 1 output. Connect LD players, VCRs
or other video components to the video inputs. The video output
channel can be used to be connected to a video tape recorder for
making recordings.

5 MONI OUT jacks [15]

The monitor output includes both RCA type and S video
configurations. This output is for connecting a television monitor or
projector.

6 COMPONENT VIDEO IN/OUT jacks [15, 18]

If your TV has component inputs, you can connect a component
video cable to the component input of your TV and to the
COMPONENT VIDEO OUT jack of your DVD Changer Receiver for
ideal video quality.
If a DVD player or other device has component video out jacks,
you can directly input a component signal to the COMPONENT
VIDEO IN jack.
The component video cable only carries the video signal;
remember to connect the left and right audio cables.
If you connect a TV that is compatible with a Progressive scan
signal, you can enjoy both Interlaced and Progressive scan.

7 SUB WOOFER PRE OUT jack [16]

This terminal is for connecting an active subwoofer.

8 DIGITAL IN (VIDEO 1 OPTICAL, VIDEO 2 COAXIAL) jacks

These are the digital audio inputs. There is 1 digital input with an
optical jack and 1 with a coaxial jack. The inputs accept digital
audio signals from MD players, hard disk recorders, CD players, or
other digital source component.

9 DIGITAL OUT (OPTICAL) jack [18, 19]

This jack is for connecting an MD recorder, CD recorder, hard disk
recorder or other component with optical fiber cable.

0 S VIDEO (VIDEO 1 IN/OUT / VIDEO 2 IN) jacks [18]

There are 2 S Video inputs and 1 output. Connect LD players,
VCRs or other video components to the video inputs. The S Video
output channel can be used to be connected to video tape recorder
for making recordings. The S-Video cable only carries the video
signal. Remember to connect the left and right audio cables.

1

3

6

5

2

4

0

9

7 8