Руководство Пользователя для Trekstor Vibez 12Gb

– 54 –

– 55 –

Select "a

ppeNd

" to add a track at the end of the current playlist.

Select "e

NQueue

" to add a track to the current playlist. The selected track is added after the track currently being 

played.

Select "r

eorder

" to change the position of the selected track in the current playlist, meaning relocating the track 

forward or backward.

Select "r

eMoVe

" to remove a track from the current playlist. You can choose whether you would like to remove a certain 

track, all tracks of the artist performing the current track, all tracks of the artist’s album, all tracks of a genre, all tracks 

of a year, all tracks below or above the selected track in the playlist or the entire tracks of the current playlist from 

the playlist.

If you select "M

ake

 p

laylist

" you have the option to save the current playlist under any name.

13.3)  Record

You have the option to choose 2 different recording sources with the vibez. You can make voice recordings using the 

integrated microphone. You can connect an external device (e.g. CD player) to the line-in jack (headphone jack) using 

the enclosed line-in cable, and directly record music from it.

To start recording:

•  Press the  button to activate the main menu.

•  Select the menu item "r

eCord

". 

•  In the following menu you can select "V

oiCe

" for voice recordings and "l

iNe

 

iN

" for line-in recordings.

•  Start recording by pressing the  button.

•  A repeated pressing of the  button will set the record function on hold.

•  By briefly pressing the  button, you can stop the current recording and begin a new recording at the same

time (i. e. a new file is created).

•  To stop a recording activate the main menu by pressing the  button and select the menu item "r

eCorder

".  

To stop recording now, select "s

top

". 

•  To stop the current recording and immediately start a new recording, select "s

plit

". 

•  To change the recording source (voice or line-in), select "C

HaNge

 

sourCe

". The current recording is stopped when the 

recording source is changed.

Exit recording mode and change back to Player mode as follows:

•  Press the  button to activate the main menu.

•  Select the menu item "r

esuMe

 p

lay

".

•  The playback function is now continued where it was last interrupted.