Руководство Пользователя для Samsung ml-1440
A.19
A
PPENDIX
Linux Driver Installation
5
Delete any previous content of the printcap.local file
located in the /etc directory and copy only the below
mentioned lines from the printcap.sam file located under
the linux/Redhat71 directory of the installation CD.
located in the /etc directory and copy only the below
mentioned lines from the printcap.sam file located under
the linux/Redhat71 directory of the installation CD.
SPL :\
:if=usr/share/printconf/foomatic/lpdomatic:\
:filter_options= --lprng $Z
:filter_options= --lprng $Z
/usr/share/printconf/foomatic/data/sec-spl.foo:\
6
Run Printtool to add a new queue. The driver name will not
be shown in the available driver list. Apply the following
settings.
be shown in the available driver list. Apply the following
settings.
a. Queue Name : Say SPL
b. Alias Name : Say SPL
c. Queue Type : /dev/lp0 (If you want to print using lpt1:) Or
b. Alias Name : Say SPL
c. Queue Type : /dev/lp0 (If you want to print using lpt1:) Or
/dev/usb/lp0 (If you want to print using USB)
d. Printer driver : Text Only Printer.
Save the queue and restart lpd. You will get a message that
lpd restarted successfully.
lpd restarted successfully.
Note: Redhat 7.1 changed ‘printtool’ to ‘printconf’, so install.sh in
CD/linux/ redhat doesn’t work any more. You can downgrade
the printconf to the printtool of Redhat 7.0, or manually
configure your printer setting by above description.
For detail documentations, refer to the following web site.
“http://www.linuxprinting.org/lpd-doc.html”
the printconf to the printtool of Redhat 7.0, or manually
configure your printer setting by above description.
For detail documentations, refer to the following web site.
“http://www.linuxprinting.org/lpd-doc.html”