Руководство Пользователя для Samsung ML-2510

4.1   

<Network setup>

This chapter gives you basic information for setting up your printer for 
network connections.

This chapter includes:
•

Once you have connected your printer to a network with an RJ-45 
Ethernet cable, you can share the printer with other network users.

You need to set up the network protocols on the printer to use it as your 
network printer. Protocols can be set up by the following programs that 
came with your printer:
• SyncThru™ Web Admin Service: A web-based printer 

management solution for network administrators. SyncThru™ Web 
Admin Service provides you with an efficient way of managing 
network devices and lets you remotely monitor and troubleshoot 
network printers from any site with corporate intranet access.

• SyncThru™ Web Service: A web server embedded to your network 

print server, which allows you to configure the network parameters 
necessary for the printer to connect to various network environments.

• SetIP: A utility program allowing you to select a network interface and 

manually configure the addresses for use with the TCP/IP protocol.

For further details, refer to the user’s guide on the network utilities CD 
that came with your printer.

The following table shows the network environments supported by the 
printer: 

• TCP/IP: Transmission Control Protocol/Internet Protocol
• DHCP: Dynamic Host Configuration Protocol
• BOOTP: Bootstrap Protocol

Network interface

• 10/100 Base-TX

Network operating 
system

• Windows 98/Me/NT 4.0/2000/XP(32/64 bit)/

2003

• Linux OS including Red Hat 8 ~ 9, 

Fedora Core 1 ~ 3, Mandrake 9.2 ~ 10.1, 
SuSE 8.2 ~ 9.2

• Mac OS 8.6 ~ 9.2, 10.1 ~ 10.4
• Unix HP-UX, Solaris, SunOS, SCO UNIX

Network protocols

• TCP/IP
• EtherTalk
• HTTP 1.1
• SNMPv2

Dynamic 
addressing server

• DHCP, BOOTP