Руководство Пользователя для Samsung pn50a530

Cable without a Cable Box
1  Plug the incoming cable into the ANT IN terminal on the back of the TV.

➢

  Because this TV is cable-ready, you do not need a cable box to view 

unscrambled cable channels.

1  Find the cable that is connected to the ANT OUT terminal on your cable box.

➢

  This terminal might be labeled “ANT OUT”, “VHF OUT” or simply, “OUT”.

  Connect the other end of this cable to the ANT IN terminal on the back of the TV.

1  Find and disconnect the cable that is 

connected to the ANT IN terminal on your 

cable box.

➢

 

This terminal might be labeled “ANT 

IN”, “VHF IN” or simply, “IN”.

  Connect this cable to a two-way splitter.

  Connect an Antenna cable between an 

OUTPUT terminal on the splitter and the IN 

terminal on the cable box.

4  Connect an Antenna cable between the 

ANT OUT terminal on the cable box and the 

B–IN terminal on the RF(A/B) switch.

5  Connect another cable between the other 

OUT terminal on the splitter and the A–IN 

terminal on the RF (A/B) switch.

6  Connect the last Antenna cable between 

the OUT terminal on the RF (A/B) switch 

and the ANT IN terminal on the rear of the 

TV.

After you have made this connection, set the A/B switch to the “A” position for normal viewing. Set the A/B switch to the “B” 

position to view scrambled channels. (When you set the A/B switch to “B”, you will need to tune your TV to the cable box’s 

output channel, which is usually channel 3 or 4.)

ANT IN

ANT IN

BN68-01526A-Eng.indb   10

2008-05-28   오후 7:23:19