Руководство Пользователя для Samsung ps-42e7
English - 20
Both screen position and size will vary depending on the type of PC monitor and its resolution.
The table below shows all of the display modes that are supported:
The table below shows all of the display modes that are supported:
Input Mode (PC)
IBM PC / AT
Compatible
Video Signal
Vertical frequency
(Hz)
70.086
70.087
59.940
70.000
72.809
75.000
56.250
60.317
70.000
72.188
75.000
60.000
74.769
60.004
70.069
72.000
75.029
70.087
59.940
70.000
72.809
75.000
56.250
60.317
70.000
72.188
75.000
60.000
74.769
60.004
70.069
72.000
75.029
Horizontal frequency
(kHz)
31.469
31.469
31.469
35.000
37.861
37.500
35.156
37.879
43.750
48.077
46.875
31.020
37.684
48.363
56.476
57.672
60.023
31.469
31.469
35.000
37.861
37.500
35.156
37.879
43.750
48.077
46.875
31.020
37.684
48.363
56.476
57.672
60.023
Vertical
polarity
polarity
P
N
N
N
N
N/P
N
N
N
N/P
P
N/P
P
P
P
P
N
N
P
P
P
N
N
N/P
P
Horizontal
polarity
N
P
N
P
N
N/P
N
N
N
N/P
P
N/P
P
P
P
N
N
N
P
P
N
N
N
N/P
P
640 x 350
720 x 400
720 x 400
640 x 480
800 x 600
848 x 480
1024 x 768
Resolution
(Dot X Line)
(N: Negative / P: Positive)
◆ The interlace mode is not supported.
◆ The television might operate abnormally if a non-standard video format is selected.
◆ 480i/p, 576i/p, 720p, or 1080i is not available in PC mode.
◆ The PC text quality is optimum in XGA mode (1024 x 768@60Hz).
1
Press the
MENU (
) button to display the menu.
2
Press the … or † button to select
Setup, then press the ENTER/OK (
) button.
3
Press the … or † button to select
PC, then press the ENTER/OK (
) button.
4
Select the required option by pressing the … or † button, then press the
ENTER/OK (
ENTER/OK (
) button.
Available options:
Image Lock, Position, Auto Adjustment, Image Reset
5
When you are satisfied with your setting, press the
ENTER/OK (
) button.
6
Press the
EXIT button to exit.
◆ Image Lock: Coarse/Fine
The purpose of picture quality adjustment is to remove or reduce picture noise.
If the noise is not removed by Fine-tuning alone, then adjust the frequency
as best as possible (coarse) and Fine-tune again.
After the noise has been reduced, re-adjust the picture so that it is aligned
on the center of screen.
If the noise is not removed by Fine-tuning alone, then adjust the frequency
as best as possible (coarse) and Fine-tune again.
After the noise has been reduced, re-adjust the picture so that it is aligned
on the center of screen.
1
Press the … or † button to select
Coarse or Fine, then press the
ENTER/OK (
) button.
2
Press the œ or √ button to adjust the screen quality, vertical stripes may
appear or the picture may be blurry. Press the
appear or the picture may be blurry. Press the
ENTER/OK (
) button.
◆ Position:
Adjust the PC’s screen positioning if it does not fit the TV screen.
1
Adjust the position by pressing the …/†/œ/√ button.
2
Press the
ENTER/OK (
) button.
◆ Auto Adjustment:
Auto adjustment allows the PC screen of set to self-adjust to the incoming
PC video signal.
The values of fine, coarse and position are adjusted automatically.
PC video signal.
The values of fine, coarse and position are adjusted automatically.
◆ Image Reset:
You can replace all image settings with the factory default values.
➢
Preset to the
PC mode by pressing the SOURCE (
) button.
Setting the PC
PC
Move
Enter
Return
Image Lock
Position
Auto Adjustment
Image Reset
Position
Auto Adjustment
Image Reset
TV
Image Lock
Move
Enter
Return
Coarse
50
Fine
0
TV
Position
Move
Enter
Return
TV
Image Reset has completed.
Return
Auto Adjustment in progress
Please wait
BN68-00889H-01Eng 3/23/06 10:23 AM Page 20