Руководство Пользователя для Samsung ps-50c96

The following settings are to use Anynet+ functions.
Using the Anynet+ Function
1  Press the Anynet+ button. 

Press the ▲ or ▼ button to select 

Setup, then press the 

ENTER/OK button.

2  Press the ENTER/OK button to select Anynet+ (HDMI-CEC), 

then press the 

ENTER/OK button.

3  Press the ▲ or ▼ button to select On, then press the ENTER/

OK button.

➢ 

The Anynet+ (HDMI-CEC) function is enabled.

➢ 

If you select 

Off, Anynet+ (HDMI-CEC) is disabled.

➢ 

When the Anynet+ (HDMI-CEC) function is disabled, all the 

Anynet+ related operations are deactivated.

Turning an Anynet+ Device Off Automatically when the TV is Turned Off
2  Press the ▲ or ▼ button to select Auto Turn Off, then press 

the 

ENTER/OK button.

3  Press the ▲ or ▼ button to select On, then press the ENTER/

OK button.

➢ 

The Auto turn off function is enabled.

➢ 

If you select 

Off, the Auto turn off function is canceled.

Press the 

EXIT button to exit.

➢ 

The Select Device setting of the TV remote control is to be set 

to TV to use the Anynet+ function.

➢ 

If you set Auto Turn Off to On, connected external devices are also turned off when the TV is turned 

off. However, if the device is recording, it may not be turned off.

1  Press the Anynet+ button.

2  Press the ▲ or ▼ button to select Select Device, then press 

the 

ENTER/OK button.

3  Press the ▲ or ▼ button to select to a particular device and 

press the 

ENTER/OK button. 

It is switched to the selected device.

4  If you cannot find a device you want, press the ▲ or ▼ button 

to select 

Searching Connections, then press the ENTER/OK 

button.

 

The meassage 

Configuring Anynet+ connection... is 

displayed. When searching devices completes, the connected 

devices are listed in the Anynet+ menu.

➢ 

Switching to the selected devices may take up to 2 minutes. 

You cannot cancel the operation during the switching 

operation.

➢ 

The time required to scan for devices is determined by the 

number of connected devices.

➢ 

When the device scan is complete, the number of found 

devices is not displayed.

➢ 

Although the TV automatically scans devices when it is turned 

on using the 

POWER button, devices connected when the TV is on or under a specific circumstance 

are not displayed in the device list. Therefore select 

Searching Connections menu to search 

devices.

➢ 

If you have selected external input mode by pressing the 

SOURCE button, you cannot use the 

Anynet+ function. Make sure to switch to an Anynet+ device by using the 

Anynet+ button.

Continued...































BN68-01171A-03Eng_0319.indd   48

2007-03-19   ｿﾀﾈﾄ 3:40:41