Release Note для Polycom IP 300
Release Notes - SIP Application
Changes
Page 6
Copyright © 2006 Polycom, Inc.
• 16161: Phone with a shared line displays the wrong softkey labels after
attempting to hot dial when the remote shared line is in use
2.4.4 Configuration File Parameter Changes
.cfg
File
File
Action Parameter
Description
sip added call.shared.exposeAutoHolds
call.shared.exposeAutoHolds="1" means
that on a shared line, when setting up a
conference, a re-INVITE will be sent to the
server.
call.shared.exposeAutoHolds="0" means no
re-INVITE will be sent to the server.
Default is “0”.
that on a shared line, when setting up a
conference, a re-INVITE will be sent to the
server.
call.shared.exposeAutoHolds="0" means no
re-INVITE will be sent to the server.
Default is “0”.
2.5 Version 1.6.5
2.5.1 Added or Changed Features
• 11805: Changed behavior when a local conference is terminated. The remote
conference legs are transferred so that the remote parties can continue the
conversation.
conversation.
• 13193: Added configuration options to allow configuration file parameters to
override DHCP values for SNTP server address and GMT offset
• 13527: Added support for setting SIP server address from DHCP option 151
• 13509: Added allowing reg.x.address to contain host part instead of being a
• 13509: Added allowing reg.x.address to contain host part instead of being a
user part only
• 13492: CA certificate expiry is no longer checked if SNTP has not been
configured
• 14052: Added flash parameter for SoundPoint IP 601phones to toggle power
requirements in CDP between 5W (no Expansion Modules can be connected)
and 12W (three Expansion Modules can be connected) with a default setting of
5W
This “EM Power” flash parameter is accessible when the SIP application is running
under the Network Configuration menu. Note that no Expansion Modules can be
connected to the phone when the “EM Power” parameter is disabled. The default
setting for this parameter is Enabled (i.e. 12W power requirement). In order for the
correct CDP power requirements to be reported at boot time as well, bootROM
version 3.1.3 is required. See Tech Bulletin TB14052 for details on how to use this
feature.
and 12W (three Expansion Modules can be connected) with a default setting of
5W
This “EM Power” flash parameter is accessible when the SIP application is running
under the Network Configuration menu. Note that no Expansion Modules can be
connected to the phone when the “EM Power” parameter is disabled. The default
setting for this parameter is Enabled (i.e. 12W power requirement). In order for the
correct CDP power requirements to be reported at boot time as well, bootROM
version 3.1.3 is required. See Tech Bulletin TB14052 for details on how to use this
feature.
• 14886: Changed power reported via CDP to platform-specific values
In order for these CDP power requirements to be reported at boot time as well,
bootROM version 3.1.3 is required.
bootROM version 3.1.3 is required.
• 15012: Added a workaround to restart the application on the phone if many
tasks get unrealistic task delays during startup (Outstanding issue 11653)