Руководство Пользователя для Samsung tx-p2670
16
I
N S TA L L AT I O N
Cable with a Cable box that Descrambles All Channels
1
Find the cable that is
connected to the ANTEN-
NA OUT terminal on your
cable box. This terminal
might be labeled “ANT
OUT”, “VHF OUT”, or sim-
ply, “OUT”.
connected to the ANTEN-
NA OUT terminal on your
cable box. This terminal
might be labeled “ANT
OUT”, “VHF OUT”, or sim-
ply, “OUT”.
2
Connect the other end of
this cable to the ANT A or
ANT B terminal on the
rear of the TV.
this cable to the ANT A or
ANT B terminal on the
rear of the TV.
▼
This terminal might be labeled
“ANT IN,” “VHF IN,” or simply,
“IN.”
“IN.”
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of
coaxial cable. (These items are available at most electronics stores.)
instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of
coaxial cable. (These items are available at most electronics stores.)
1
Find and disconnect the
cable that is connected to
the ANTENNA IN
cable that is connected to
the ANTENNA IN
termi-
nal on your cable box.
2
Connect this cable to a
two-way splitter.
two-way splitter.
3
Connect a coaxial cable
between an OUTPUT
terminal on the splitter and
the IN terminal on the
cable box.
between an OUTPUT
terminal on the splitter and
the IN terminal on the
cable box.
AA68-03263B-00_eng_Chapter2 4/21/04 5:31 PM Page 16