Краткое Руководство По Установке для Iwatsu ADIX APS
Set Follow Me Destination
•
Lift the receiver (handset)
•
Press [FWD] + [FWD]
•
Enter the Call Type you wish to forward
1 = All calls (CO/Intercom)
2 = CO calls only
3 = Intercom calls only
1 = All calls (CO/Intercom)
2 = CO calls only
3 = Intercom calls only
•
Enter the extension number of the originating
forwarding station
forwarding station
Hold/Quick Forward Operation
•
If your phone is equipped with this feature, pressing
[HOLD/DND] will automatically forward all incoming
calls to your fixed call forward destination.
[HOLD/DND] will automatically forward all incoming
calls to your fixed call forward destination.
Master Hunt Groups
Enterprise-CS allows extensions to be programmed into
Hunt Groups. Each Hunt Group is assigned code and
when dialed the system searches for the first idle
extension.
Hunt Groups. Each Hunt Group is assigned code and
when dialed the system searches for the first idle
extension.
To Call a Hunt Group
•
Lift the receiver
•
Wait for the dial tone
•
Dial Hunt Group access code
o r
o r
•
Press [HUNT] if assigned as a Multipurpose button
Message Waiting
To Leave a Message
When the extension you are calling is busy or does not
answer
When the extension you are calling is busy or does not
answer
•
Do not hang up
•
Press the [MESSAGE] button and
•
After you hear a confirmation tone, hang up
The [MESSAGE] button lamp will stay lit at the called
extension
The [MESSAGE] button lamp will stay lit at the called
extension
To Cancel Message Waiting
If you want to cancel a message you left at an extension
If you want to cancel a message you left at an extension
•
Lift the receiver
•
Press the [MESSAGE] button and
, then dial the
extension number
•
After you hear a confirmation tone, hang up
The [MESSAGE] button lamp will go out at the
extension.
The [MESSAGE] button lamp will go out at the
extension.
Note:
This feature is not available if the [MBOX] key
is used for voicemail access.
Flexible Call Forwarding
You can set your phone to forward calls to another
extension or to an external telephone number. To forward
calls externally, you must first register the external
telephone number to a personal speed dial code (90-
99). (See the Speed Dial feature)
extension or to an external telephone number. To forward
calls externally, you must first register the external
telephone number to a personal speed dial code (90-
99). (See the Speed Dial feature)
You can also separate Call Forward destinations for ICM
calls and CO incoming calls. For example, you could
forward all ICM calls to your cellular telephone and all CO
calls to your Voice Mail.
calls and CO incoming calls. For example, you could
forward all ICM calls to your cellular telephone and all CO
calls to your Voice Mail.
Set Forward Destination
•
Lift the receiver (handset) or press [SPKR]
•
Press [FWD]
•
Enter the Call Type you wish to forward
1 = All calls (CO/Intercom)
2 = CO calls only
3 = Intercom calls only
1 = All calls (CO/Intercom)
2 = CO calls only
3 = Intercom calls only
•
Enter the Flexible Call Forward Mode
1 = All calls to another extension or hunt group
2 = Busy/No Answer calls to another extension or
1 = All calls to another extension or hunt group
2 = Busy/No Answer calls to another extension or
hunt group
3 = No Answer calls to another extension or hunt
group
4 = All Calls forward to an external number (using
Personal Speed Dial Codes 90-99)
•
Do one of the following
If you chose Mode 1,2, or 3, enter the extension or
hunt group number
If you chose Mode 4, enter the Personal Speed Dial
Code (90-99)
If you chose Mode 1,2, or 3, enter the extension or
hunt group number
If you chose Mode 4, enter the Personal Speed Dial
Code (90-99)
Forward Cancel
•
Lift the receiver (handset)
•
Press [FWD]
•
Press
•
Enter the Call Type number you wish to cancel
1 = Cancel Forwarding of All calls (CO/Intercom)
2 = Cancel Forwarding of CO calls only
3 = Cancel Forwarding of Intercom calls only
1 = Cancel Forwarding of All calls (CO/Intercom)
2 = Cancel Forwarding of CO calls only
3 = Cancel Forwarding of Intercom calls only
Set Active/Inactive
•
Press [FWD]
•
Enter the Call Type you wish to make
Active/Inactive
1 = All calls (CO/Intercom)
2 = CO calls only
3 = Intercom calls only
Active/Inactive
1 = All calls (CO/Intercom)
2 = CO calls only
3 = Intercom calls only
11
12