Руководство Пользователя для Boss Audio 648bi

Скачать
Страница из 48
2
1. NOTE OF DISCS
MOISTURE CONDENSATION
NOTES ON CDs
P. 5
P. 6
P. 7
NOTES ON DISCS
There are paste residue.
Ink is sticky (P.5).
Stickers that are beginning 
to peel away, leaving a 
sticky residue (P.6).
Labels are attached (P.7).
On a rainy day or in a very damp area, moisture may condense on the lenses inside the unit. 
Should this occur, the unit will not operate properly. In such a case, remove the disc and wait for 
about an hour until the moisture has evaporated.
If  you  use  the  discs  explained  below,  the 
sticky  residue  can  cause  the  CD  to  stop 
spinning and may cause malfunction or ruin 
your discs.
Do not use second-hand or rental CDs that 
have  a  sticky  residue  on  the  surface  (for 
example,  from  peeled-off  stickers  or  from 
ink, or glue leaking from under the stickers).
Do not use rental CDs with old labels that 
are beginning to peel off.
Do not use your CDs with labels or stickers 
attached.
**************
*******
*******
*******
*******
*******
*******
*******
*******
****
*******
******* *******
*******
Do Not Use Special Shape CDs
Be sure to use round shape CDs only for 
this unit and do not use any special shape 
CDs. Use of special shape CDs may cause 
the unit to malfunction.(P.8).
Be sure to use CDs with disc mark  
Only for this unit.
RECORDABLE
REWRITABLE
P. 8
CD-Rs and CD-RWs which have not 
undergone finalization processing cannot 
be played. (For more information on 
finalization processing, refer to the manual 
for your CD-R/CD-RW writing software or 
CD-R/CD-RW recorder.) Additionally, 
depending on the recording status, it may 
prove impossible to play certain CDs 
record on CD-R or CD-RW.
TEXT
P. 2
P. 3
P. 4
P. 1
1.
2.
3.
4.
5.
A dirty or defective disc may cause sound 
dropouts while playing. To enjoy optimum 
sound, handle the disc as follows.
Handle the disc by its edge. To keep the 
disc clean, do not touch the surface (P.1).
Do not stick paper or tape on the disc (P.2).
Before playing, clean the discs with an 
optional cleaning cloth. Wipe each disc from 
the centre out (P.4).
Do not use solvents such as benzene, 
thinner,commercially available cleaners, or 
antistatic spray intended for analog discs.
Do not expose the discs to direct sunlight or 
heat sources such as hot air-ducts, or leave 
them in a car parked in direct sunlight where 
there can be a considerable rise in 
temperature inside the car (P.3).