Справочное Руководство для Infocus LP500
7
SETTING UP THE PROJECTOR
1
Place the projector on a flat surface.
•
The projector must be within 10 feet (3 m) of your power
source and within 6 feet (1.8 m) of your computer.
source and within 6 feet (1.8 m) of your computer.
•
If you want to project from behind a translucent screen, set
up the projector behind your screen. See “Rear Project” on
page 34 to reverse the image.
up the projector behind your screen. See “Rear Project” on
page 34 to reverse the image.
•
If you are installing the projector on the ceiling, refer to the
installation guide that comes with the Ceiling Mount Kit for
more information. To turn the image upside down, see
“Ceiling Project” on page 34. The Ceiling Mount Kit is sold
separately, see “Optional Accessories” on page 56.
installation guide that comes with the Ceiling Mount Kit for
more information. To turn the image upside down, see
“Ceiling Project” on page 34. The Ceiling Mount Kit is sold
separately, see “Optional Accessories” on page 56.
2
Position the projector the desired distance from the screen.
NOTE: The projector must be at
least 5 feet (1.5 m) from the pro-
jection screen.
•
The distance from the lens of the projector to the screen and
the zoom setting determine the size of the projected image.
Figure 4 shows three projected image sizes. For more infor-
mation about image size, see “Projected Image Size” on
page 64.
the zoom setting determine the size of the projected image.
Figure 4 shows three projected image sizes. For more infor-
mation about image size, see “Projected Image Size” on
page 64.
F
IGURE
4
Projected image size at minimum zoom
3
Make sure the projector is unplugged and your computer is
turned off.
turned off.
3.0
ft.
11
.8 f
t.
7.1
ft.
5 ft
.
12 ft.
20 ft.