Руководство По Установке для Infocus lp610
1
CEILING MOUNT INSTALLATION GUIDE
The LitePro 600 Series LiteMount
TM
makes it easy
to hang your LitePro from the ceiling for fixed
installation use in meeting, auditorium and
training room settings.
installation use in meeting, auditorium and
training room settings.
WARNING: This installa-
tion must be performed in
compliance with your
local building code require-
ments. Local require-
ments take precedence
over any instructions given
in this guide.
You must determine the suitability of this prod-
uct for your intended use and assume all risk
and liability in connection therewith. In Focus
recommends that a professional contractor or
other facilities professional assist you in mount-
ing this device. Be sure to take precautions to
meet all local building codes.
uct for your intended use and assume all risk
and liability in connection therewith. In Focus
recommends that a professional contractor or
other facilities professional assist you in mount-
ing this device. Be sure to take precautions to
meet all local building codes.
Additional LiteMount Products
In Focus offers two additional LiteMount prod-
ucts that may make your ceiling mount installa-
tion easier.
ucts that may make your ceiling mount installa-
tion easier.
•
The LiteMount False Ceiling Plate
(
(
SP-LTMT-PLT
) is designed for suspended ceil-
ings with acoustic tiles. It mounts in your ceil-
ing in place of a ceiling tile. It is pre-drilled
with holes to install the LiteMount brackets.
ing in place of a ceiling tile. It is pre-drilled
with holes to install the LiteMount brackets.
•
The LiteMount Pipe Tubing Extension (
SP-
LTMT-EXT
) allows you to install the projector
in a room with a high ceiling. With the exten-
sion, you can place the projector from 12”
(30.5) to 46” (117 cm) from the ceiling.
sion, you can place the projector from 12”
(30.5) to 46” (117 cm) from the ceiling.
Contact your In Focus dealer to order these
products.
products.
Placing the Projector
To ensure that the projected image is not dis-
torted, the projector must be installed so that the
center of the lens is at the same height as the top
of the projection screen.
torted, the projector must be installed so that the
center of the lens is at the same height as the top
of the projection screen.
010-0132-02-eng-ger.fm Page 1 Monday, March 31, 1997 11:23 AM