Справочное Руководство для Infocus LP860
13
Adjusting the image
Adjust the height of the projector, if necessary, by pressing the release but-
tons on each side of the projector’s front to extend the elevator feet.
tons on each side of the projector’s front to extend the elevator feet.
Position the projector the desired distance from the screen at a 90 degree
angle (perpendicular) to the screen.
angle (perpendicular) to the screen.
See page 43 for a table listing screen sizes and distances.
Adjust the zoom or focus by pressing the power Zoom or power Focus
buttons on the keypad until the desired image size and focus are produced.
buttons on the keypad until the desired image size and focus are produced.
You can also adjust the zoom and focus via the menus. See page 32
If the image is not on the screen or viewing area, adjust it by pressing the
lens shift button on the keypad.
lens shift button on the keypad.
Press the upper Lens Shift button to shift the lens upward. Press the lower
Lens Shift
Lens Shift
button to shift the lens downward.
Adjust the Contrast or Brightness in the Picture menu.
adjust height
elevator
foot
foot
elevator
foot
foot
release
button
button
release
button
button
adjust distance
zoom focus
adjust zoom and focus
lens shift
adjust lens shift
adjust Contrast or Brightness
contrast
brightness