Руководство Пользователя для Infocus 8602
29
Setup menu
Language
: Allows you to select a language for the onscreen display.
Key Click
: Turns the key click sound on or off. When this setting is on,
pressing keys on the keypad causes the projector’s speaker to play a “click”
sound.
Custom Key
Custom Key
: Allows you to assign a different function to the Custom button,
allowing you to quickly and easily use the effect. Highlight an effect and
press Select to choose a different one.
•
•
Source Info
: The default action. Shows the Source Info menu.
•
Projector Info
: Shows the Projector Info menu.
•
Aspect Ratio
: Sets the ratio of image width to image height (see page 14
and page 27).
•
Auto Image
: Resynchronizes the projector to the source (page 24).
•
Overscan
: Removes noise around the image.
•
Blank Screen
: Displays an empty screen.
•
Freeze Screen
: Pauses the projected image.
•
Source
: Cycles through available sources.
•
Closed Caption
: Enables or disables Closed Captioning.
•
SplitScreen
: Enables or disables SplitScreen. Before using this for the
first time, configure SplitScreen sources and layouts using the
SplitScreen menu (page 27)
Source Key Enable
: Enables or disables Source Keys on the optional
Commander-2 remote.
AC Power On
AC Power On
: When this feature is on, the projector automatically turns on
when electrical power is connected. This allows control of ceiling mounted
projectors with a wall power switch.
Auto Off Time
Auto Off Time
: Automatically turns the projector off after no signals are
detected for a preset number of minutes. If an active signal is received
before the projector powers down, the image will be displayed.
Screen Save Time
Screen Save Time
: Automatically blanks the screen with a black color after no
signals are detected for a preset number of minutes. The image returns
when an active source is detected or a remote or keypad button is pressed.
Sleep Timer
: Allows the projector to automatically power off after it has been
on for a specified amount of time.
Always-On Functions
Always-On Functions
: Allows you to control which projector functions will
work even when the projector is in standby (powered off but connected to
AC Power). Press Up or Down to highlight the function you want to
change, then press select or left and right to change the function to either
Yes or No. Press menu when done. Note that some functions must always
have the same value; in this case when you change one value, other values
in the submenu may also change automatically.
Lamp High Power
Lamp High Power
: Toggles between on and off. Turn it on to raise the light
output of the lamp. This also raises the fan speed, making the projector
louder. Default is off.
Power Sounds
Power Sounds
: Controls whether the projector makes a sound when
powered on and off.
Auto Source
Auto Source
: When this feature is On, the projector automatically finds the
active source, checking the selected Power-up Source first. When this
feature is Off, the projector defaults to the source selected in Power-up
Source. To display another source, you must manually select one by
pressing the Source button on the remote or keypad.
Power-up Source
: Determines which source the projector checks first for
active video during power-up.
HDMI DDC
: When this feature is set to On, the projector will support and
older DVD player for HDMI port.
Fast Color Refresh
: Changes the color wheel speed from 4x to 6x.
Video Standard
: When this feature is set to Auto, the projector attempts to
automatically pick the video standard based on the input signal it receives.
(The video standard options may vary depending on your region of the
world.) If the projector is unable to detect the correct standard, the colors
may not look right or the image may appear “torn.” If this happens,
manually select a video standard by selecting NTSC, PAL, or SECAM from
the Video Standard menu.
Closed Captions
Closed Captions
: Controls closed caption display while audio is not muted. If
this setting is not off, and audio is not muted, and the source is NTSC and