Справочное Руководство для Olympus fe-180

54 

EN

• If you use a non-Olympus card or a card used for another application, such 

as for a computer, the message [CARD ERROR] is displayed. To use this 
card with this camera, use the [FORMAT] function to format the card.

g “MEMORY FORMAT (FORMAT) Formatting the internal memory or card” 

This camera uses several lamps to indicate the camera status.

• Performing any of the following operations when not actually taking pictures 

can deplete the battery power.

• Repeatedly pressing the shutter button halfway
• Repeatedly using the zoom
• Not using the power save mode ([POWER SAVE] set to [NO])

• To save battery power, turn off the camera whenever it is not in use.

• Some items may not be selectable from the menus when using the arrow pad.

• Items that cannot be set with the current shooting mode
• Items that cannot be set because of an item that has already been set: 

[

%] and [#], etc.

• Items that cannot be set because you are attempting to edit pictures 

taken with another camera.

• Some functions cannot be used when there is no card in the camera.

[PANORAMA]/[PRINT ORDER]/[FORMAT]/[BACKUP]

Lamp

Status

Self-timer lamp

The lamp lights for approximately 10 seconds, blinks for 
approximately 2 seconds, and then the picture is taken.

Card access lamp

Lit (red): Shooting mode
Lit (green): Playback mode
Unlit: Power is off.
Blinking: A picture is being recorded, the camera is reading 
a movie, or images are being downloaded (when 
connected to a computer).
• Do not do any of the following while the card access lamp 

is blinking. Doing so may prevent the image data from 
being saved and render the internal memory or card 
unusable.

• Open the battery/card compartment cover
• Remove the batteries

Green lamp of the 
monitor

Lit: The focus and exposure are locked.
Blinking: The focus and exposure are not locked.
• Release your finger from the shutter button, re-position 

the AF target mark on the subject and press the shutter 
button halfway again.