Руководство Пользователя для Olympus 7010

Скачать
Страница из 72
55
EN
Appendix
Battery and charger
This camera uses one Olympus lithium-ion 
battery (LI-42B/LI-40B). No other type of 
batteries can be used.
 CAUTION: 
There is a risk of explosion if the battery 
is replaced with the incorrect battery type. 
Dispose of the used battery following the 
instructions. “Battery Handling Precautions” 
(p. 61)
Power consumption by the camera varies 
depending on which functions are used.
During the conditions described below, power is 
consumed continuously and the battery becomes 
exhausted quickly.
The zoom is used repeatedly.
The shutter button is pressed halfway 
repeatedly in shooting mode, activating the 
auto focus.
A picture is displayed on the monitor for an 
extended period of time.
The camera is connected to a computer or 
printer.
Using an exhausted battery may cause the 
camera to turn off without displaying the battery 
level warning.
The rechargeable battery is not fully charged at 
the time of purchase. Charge the battery fully 
with LI-41C/LI-40C charger before use.
The provided rechargeable battery usually takes 
approximately 2 hours to charge (varies with 
usage).
The supplied LI-41C battery charger is used only 
for LI-42B/LI-40B battery. Do not charge other 
type of battery with the supplied battery charger. 
It might cause explosion, leaking, overheating 
or fi re.
For plug-in type battery charger:
This power unit is intended to be correctly 
orientated in a vertical or fl oor mount position.

Camera care
Exterior
Wipe gently with a soft cloth. If the camera is 
very dirty, soak the cloth in mild soapy water and 
wring well. Wipe the camera with the damp cloth 
and then dry it with a dry cloth. If you have used 
the camera at the beach, use a cloth soaked in 
clean water and wrung well.
Monitor
Wipe gently with a soft cloth.
Lens
Blow dust off the lens with a commercial blower, 
then wipe gently with a lens cleaner.
Battery/Charger
Wipe gently with a soft, dry cloth.
  Do not use strong solvents, such as benzene 
or alcohol, or chemically treated cloth.
  Mold may form on the lens surface if the lens is 
left dirty.
Storage
When storing the camera for extended periods, 
remove the battery, AC adapter and card, and 
keep in a cool, dry place that is well ventilated.
Periodically insert the battery and test the 
camera functions.
  Avoid leaving the camera in places where 
chemical products are handled since this may 
result in corrosion.