Руководство Пользователя для Olympus vr-370

EN

If the camera does not work as intended, or if an 
error message is displayed on the screen, and you 
are unsure of what to do, refer to the information 
below to fi x the problem(s).

 

● Insert recharged batteries in the correct 

direction.
“Inserting and removing the battery and card 
(commercially available)” (p. 4), “Charging the 
battery” (p. 5)

 

● Battery performance may have been reduced 

temporarily due to low temperature. Take the 
batteries out of the camera, and warm them by 
putting them in your pocket for a while.

“Error message” (p. 52)

 

● Cancel sleep mode.

To save battery power, the camera 
automatically goes into sleep mode and the 
monitor turns off if there is no operation for 
3 minutes when the camera is turned on. No 
picture is taken even if the shutter button is 
fully pressed in this mode. Operate the zoom 
lever or other buttons to restore the camera 
from sleep mode before taking a picture. If 
the camera is left for another 12 minutes, it 
automatically turns off. Press the n 
button to turn the camera on.

 

● Press the 

q button to switch to the shooting 

mode.

 

● Wait until 

#(fl ash charge) stops blinking 

before taking pictures.

 

● Condensation may have occurred. Turn off 

the power, and wait for the camera body 
to become acclimated to the surrounding 
temperature and dry out before taking pictures.

 

● This condition may occur when the camera is 

pointed at an extremely bright subject under a 
clear sky and so on.
The lines may appear on the recorded picture 
or movie with sequential shots.

 

● Shooting with fl ash in dark situations results in 

an image with many fl ash refl ections on dust 
in the air.