Справочник Пользователя для TOA c-ap105

14

1  2  3  4

1

2

3

4

MIC/ LINE

PHANTOM

AUDIO ADJ

NC

Terminal name

No.

1: Selects either microphone level signal or line level signal as the audio input. Set to "MIC" when connecting

a microphone, and to "LINE" when connecting other devices. ("LINE" is the default.)

2: Supply voltage is 9 V DC.

When supplying the phantom power to the device connected to the audio input terminal, set the MIC/LINE
switch to MIC, then set this switch 2 to ON. ("OFF" is the default.)

3: Used for audio adjustment.

When adjusting, set this switch to ON and restart the Receiver. When the adjustment is complete, set this
switch to OFF and restart the Receiver. Audio signals from the audio input and microphone can be output
through the audio output terminal and monitored. ("OFF" is the default.)

4: This switch is not used. 

Returns the set contents to default conditions. 

1. Either press the Reset key or switch on the power again while holding down the INIT key.

2. Continue to press the INIT key until the Ready indicator has switched from flashing to steady-on mode.

Remedy

Supply power independently to the
Receiver.

Confirm that the cable type (category, null
modem or straight) is appropriate for the
connected port, then connect correctly.

Symptom

Receiver does not start.
(Ready LED does not
light.)

LINK/ACT LED does
not light.

Possible Cause
Power is not supplied.
[ When using a PoE-compatible hub
for power supply ]

• Receiver not connected to the

PoE-compatible hub.

• PoE-compatible hub’s PoE

function is not made valid.

• Receiver is connected to the PoE-

compatible hub’s port not
supporting PoE. 

• Power requirement exceeds the

PoE-compatible hub’s supply
capability. 

[ When using 24V AC or 24V DC for
power supply ]

• Incorrect terminal connections.

Cable is not correctly connected to
the Receiver’s network terminal.