Руководство Пользователя для Magellan cx

-

To enter your first NTRIP configuration, with 

New selected 

in the 

NTRIP Configuration field, tap on the Add button and 

then enter the following parameters:

•

Name: NTRIP Configuration Name (freely choose a 
name)

•

Host: Host IP address

•

Port: Port number

•

Login: User name

•

Password: User password
(The last four parameters should have been passed on 
to you by the NTRIP provider.)

-

Tap 

OK. The name of the configuration you have just cre-

ated is now pre-selected in the 

NTRIP Configuration field. 

Two new buttons (

Edit and Delete) are shown under this 

field allowing you to respectively edit or delete this config-
uration. When you edit an existing configuration, note that 
you cannot change its name.

To create a second NTRIP configuration, you would tap 
the down arrow to the right of the 

NTRIP Configuration field 

and select 

New. The Add button would appear again under 

the field. You would then tap this button, enter the five 
parameters of the second configuration and tap 

OK to save 

this new configuration.

-

After selecting the desired configuration from the 

Configuration field, tap OK. MobileMapper CX connects to 
the NTRIP caster. The NTRIP Settings window is dis-
played again on which you can choose a network and sta-
tion (corrections source) from the caster. The 

Get Table 

button is for downloading the new list of available stations 
in the case you select a new provider from the 

Caster field.

-

The best choice is to use the station the nearest to your 
current location. Tap on the 

Find Nearest button to find and 

select this station. This causes the 

Network and Station 

fields to be automatically updated. The distance to this 
station is indicated just underneath the 

Station field. A 

second parameter in the same line tells you whether the 
selected station provides VRS corrections data or not (VRS 
for “Virtual Reference Station”; if VRS, the station pro-
vides corrections data for a virtual station that would be 
located where you are. If not VRS, the corrections data are 
computed for the true location of the station).