Руководство Пользователя для Magellan 1500

4

1.

Press and hold the power button until the Triton 

splash screen is displayed.

When turning off the Triton you can select to have it 

shutdown or go into suspend mode.

1.

Press the Power button and the Triton will begin the 

shutdown sequence.

2.

To place the Triton in suspend mode, press Enter 

before the shutdown sequence is complete.

3.

To cancel the shutdown sequence and return to the last viewed screen, press any key or tap 

the screen.

4.

If after 5 seconds no key has been pressed, the Triton will shutdown.

Depending upon the lighting conditions you are in you may need to change the backlight settings for 

the display.  There are five levels of backlight intensity, press the backlight button momentarily to 
step through each level of backlight intensity.

1.

Press the backlight button momentarily.  The 

backlight intensity will increase 20% until it reaches 
the maximum intensity.  Pressing the backlight 
button again will turn off the display backlight.

Please note that reducing the backlight setting will increase 

the battery life for the Triton.  Refer to the section in this 
chapter on Battery Life for other tips on extending the 
Triton’s battery life.  Also note that the backlight and the 
flashlight use the same button on the Magellan Triton.  Press 
the button momentarily to control the backlight setting, press 
and hold the button to turn the flashlight on and off. 

The time and date information will be computed from information from the GPS satellites so there is 

no requirement for you to input any time or date information.  However, to make the time accurate 
for your location you must select the correct time zone.

1.

From the Map screen press MENU.

2.

Select View.

3.

Select Profiles.

4.

Select the profile you want to use.  (See the chapter on Profiles for more information.)

5.

Press the PAGE / GO TO button to change the page to the Display page.